|
Are you looking for:
|
D0786 Severe Duty Disc Pads: Front and Rear - International
Phoenix Friction's Severe Duty (SD) Brake Pads are the standard formula for higher heat
applications. Ideal for performance cars, pickups, SUV's, and
higher performance European vehicles.
Our Severe Duty (SD) brakes are formulated with sophisticated materials to provide strong, supreme dual layered friction for the most intense and severe braking conditions. Delivering increased stopping power over our premium semi-metallic ”M” formulation, our SD brakes supplies maximum sheer strength under severe conditions.
All of our Premium Severe Duty brake pads feature mechanically
attached, application specific constrained layer shims for superior
noise abatement. We highly recommend applying a small amount of heavy
molybdenum disulfide paste on all sliding metal contact surfaces.
Equivalent to:
|
07-131 Clutch Kit: Ford 7.3L Diesel F250 F350 F450 Pickup - 12¼"
This is an OE clutch kit sourced from one or more OE Manufacturers such as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or made by us at Phoenix Friction Products. The OE pressure plate and woven organic disc is ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.
This is a direct OE replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest of
the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Equivalent to: K70244-01
Other available clutch kits for this vehicle:
07-131.2K Kevlar, Engine Torque Capacity = 410 lb.ft., 215HP
07-131.3C Ceramic, Engine Torque Capacity = 510 lb.ft., 275HP
07-131ACK Organic, Engine Torque Capacity = 360 lb.ft., 185HP (includes flywheel FW128)
07-131ACK.3C Ceramic, Engine Torque Capacity = 510 lb.ft., 275HP (includes flywheel FW128)
07-131CK Organic, Engine Torque Capacity = 360 lb.ft., 185HP (includes flywheel FW127)
07-131CK.2K Kevlar, Engine Torque Capacity = 410 lb.ft., 215HP (includes flywheel FW127)
07-131CK.3C Ceramic, Engine Torque Capacity = 510 lb.ft., 275HP (includes flywheel FW127)
To determine the horsepower added by performance modifications, click here
To see comments and suggestions regarding transmission gear rattle, click here
|
CSC200 Clutch Slave Cylinder: Nissan 200SX, Pulsar, Pathfinder, Pickup
This is a NEW OE replacement Slave Cylinder. All hydraulic components are manufactured by OE manufacturers. The picture (when available) is of the actual product. If the master cylinder you are replacing is different in any way, please contact us for technical assistance. To ensure proper function, the hydraulic system MUST BE bled of all air using new DOT 3 brake fluid. The clutch pedal height and free play should be checked for proper adjustment. If the DOT 3 Fluid in the hydraulic system is not golden in color, the system has become contaminated and the fluid must be replaced. If the discoloration has a black tint, it is the result of the master or slave cylinder seals wearing out. In these cases, we strongly suggest replacing these components to avoid unnecessary costs later.
|
D0965S High Heat Formulation Disc Brake Pad Set - Dodge
Best In Class Friction Formulation
Made In America
Long Life, Low Rotor Wear, No Noise, No Dust
This Heavy Duty Fleet (HDM) Formulation is used on commercial and automotive fleet vehicles, police, emergency, and other extreme duty applications where a high-heat, long-life disc pad is required.
* Our Heavy Duty Semi-Metallic is our "Extreme High Heat" formulation providing an industry leading heat range of up to 1000 degrees Fahrenheit!
* Another major significance of our HDM formulation is that it does not exceed the Measure of Hardness (MOH rating) of the brake rotor. This ensures very long life of the disc pads and rotors (up to three times longer than competitors' pads) because the pads and rotors wear evenly throughout the life of the pad.
* These pads are post-press cured for twenty four hours for outstanding off the shelf performance and durability.
* This formulation contains no asbestos, no copper, and no lead. A Greener formulation for a better environment.
All these factors reduce the "Cost-Per-Mile" of a brake job which is the most important consideration for fleet operations when purchasing brake pads. This is what makes the Phoenix Friction Products HDM Brake Formulation the most cost-effective set of Disc Brake Pads on the market today!
Equivalent to: D965, MKD965, 7864-D965
|
D0898S High Heat Formulation Disc Brake Pad Set - Dodge
Best In Class Friction Formulation
Made In America
Long Life, Low Rotor Wear, No Noise, No Dust
This Heavy Duty Fleet (HDM) Formulation is used on commercial and automotive fleet vehicles, police, emergency, and other extreme duty applications where a high-heat, long-life disc pad is required.
* Our Heavy Duty Semi-Metallic is our "Extreme High Heat" formulation providing an industry leading heat range of up to 1000 degrees Fahrenheit!
* Another major significance of our HDM formulation is that it does not exceed the Measure of Hardness (MOH rating) of the brake rotor. This ensures very long life of the disc pads and rotors (up to three times longer than competitors' pads) because the pads and rotors wear evenly throughout the life of the pad.
* These pads are post-press cured for twenty four hours for outstanding off the shelf performance and durability.
* This formulation contains no asbestos, no copper, and no lead. A Greener formulation for a better environment.
All these factors reduce the "Cost-Per-Mile" of a brake job which is the most important consideration for fleet operations when purchasing brake pads. This is what makes the Phoenix Friction Products HDM Brake Formulation the most cost-effective set of Disc Brake Pads on the market today!
Equivalent to: D898, MKD898, 7775-D898, 5080563AA
|
D0949E High Heat Formulation Disc Brake Pad Set - Dodge
Best In Class Friction Formulation
Made In America
Long Life, Low Rotor Wear, No Noise, No Dust
This Heavy Duty Fleet (HDM) Formulation is used on commercial and automotive fleet vehicles, police, emergency, and other extreme duty applications where a high-heat, long-life disc pad is required.
* Our Heavy Duty Semi-Metallic is our "Extreme High Heat" formulation providing an industry leading heat range of up to 1000 degrees Fahrenheit!
* Another major significance of our HDM formulation is that it does not exceed the Measure of Hardness (MOH rating) of the brake rotor. This ensures very long life of the disc pads and rotors (up to three times longer than competitors' pads) because the pads and rotors wear evenly throughout the life of the pad.
* These pads are post-press cured for twenty four hours for outstanding off the shelf performance and durability.
* This formulation contains no asbestos, no copper, and no lead. A Greener formulation for a better environment.
All these factors reduce the "Cost-Per-Mile" of a brake job which is the most important consideration for fleet operations when purchasing brake pads. This is what makes the Phoenix Friction Products HDM Brake Formulation the most cost-effective set of Disc Brake Pads on the market today!
Equivalent to: A0034201720, AE7848M, AT949, GMD949F, SX949
|
(0) 
