|
Are you looking for:
|
CF9833 Clutch Fork: Cadillac, Chevrolet, Pontiac
This is a new OE replacement Clutch Fork. The picture (when available) is of the actual product. Wear at the contact points of the clutch fork and the release bearing can cause hard pedal and/or problems with release. In addition, clutch forks made from stamped steel have a tendency to warp or fatigue and not retain their original shape. It is recommended to carefully inspect the clutch fork for these issues and replace as required. Inspection of the transmission bearing retainer, clutch ball stud, bushings, and other release system components is also highly recommended at this time. Replace parts as necessary.
|
FW502 Flywheel: GMC S-10 Late Models
This is NEW OE replacement Flywheel. The picture (when available) is of the actual product, and shows both sides. If the flywheel you are replacing is different in any way, please contact us for technical assistance. Flywheels that have too much material removed can affect the clutch release in hydraulic release systems. Is some cases, the flywheel cannot be resurfaced. In these cases, the flywheel is sold as part of the clutch kit.
|
05-029A.3C Stage 3 Ceramic Clutch Kit: Dodge, Plymouth Cars
This is a special kit made for Dodge & Plymouth vehicles that take a 10-1/2" clutch for their flywheel but need the larger spline size disc normally available in the 426cid and 440cid engines.
This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications. A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.
|
CRC149 Clutch Release Cable: Plymouth Champ, Dodge Colt,
This is a new OE replacement Clutch Cable. The picture (when available) is of the actual product. If adjustments to the cable are no longer possible, replace the cable to ensure proper clutch release. For vehicle that are 15 years or older, it is advisable to replace the cable to avoid failure due to fatigue.
|
08-030.3C Stage 3 Ceramic Clutch Kit: Honda Prelude - 8-5/8"
This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.
A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
08-030 Organic, Engine Torque Capacity = 205 lb.ft., 235HP
08-030.2 Organic, Engine Torque Capacity = 245 lb.ft., 280HP
08-030iF Organic, Engine Torque Capacity = 205 lb.ft., 235HP (includes flywheel)
|
07-114.2K Stage 2 Kevlar Clutch Kit: Ford Mustang - 11"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-114 Organic, Engine Torque Capacity = 305
lb.ft., 305HP
07-114.3C Ceramic, Engine Torque Capacity = 425
lb.ft., 425HP
|
(0) 
