|
Are you looking for:
|
D1327A Severe Duty Disc Pads: Front - Chrysler Van Dodge SUV, Van
Phoenix Friction's Severe Duty (SD) Brake Pads are the standard formula for higher heat
applications. Ideal for performance cars, pickups, SUV's, and
higher performance European vehicles.
Our Severe Duty (SD) brakes are formulated with sophisticated materials to provide strong, supreme dual layered friction for the most intense and severe braking conditions. Delivering increased stopping power over our premium semi-metallic ”M” formulation, our SD brakes supplies maximum sheer strength under severe conditions.
All of our Premium Severe Duty brake pads feature mechanically
attached, application specific constrained layer shims for superior
noise abatement. We highly recommend applying a small amount of heavy
molybdenum disulfide paste on all sliding metal contact surfaces.
Equivalent to:
|
D0932 Semi-Met Disc Pads: Rear - Ford, Lincoln, Mercury
Premium Semi-Metallic (M) – the standard formula for higher heat applications. Ideal for mid to full-size cars, pickups, SUV's, and European vehicles.
Our premium Semi-Metallic is suitable across many platforms and offers excellent stable performance and superior brake service life. This formulation uses only premium raw materials including the highest quality carbon available for low dust, quiet operation, and cleaner brake components.
All of our Premium Semi-Metallic brake pads feature mechanically attached, application specific constrained layer shims for superior noise abatement. We highly recommend applying a small amount of heavy molybdenum disulfide paste on all sliding metal contact surfaces.
Equivalent to:
|
D0843 Ceramic Disc Pads: Front - Ford SUV, Mazda SUV, Mercury SUV
Our Ceramic Formulation (C) consists of a non-ferrous formulation used on Asian and many domestic passenger vehicles where cool, clean and quiet operation is absolutely essential. Quieter by design and formulated to extend brake life.
Quieter by design and formulated to extend brake life, our Premium Ceramic formulation will provide you with industry leading performance and value. This is a very low dusting compound with extremely light gray dust particles. This brake pad has a very stable and linear friction profile which allows very effective ABS system performance.
All of our Premium Ceramic brake pads feature mechanically
attached, application specific constrained layer shims for superior
noise abatement. We highly recommend applying a small amount of heavy
molybdenum disulfide paste on all sliding metal contact surfaces.
Equivalent to:
|
D0370A High Heat Formulation Disc Brake Pad Set - Chevy, GMC
Best In Class Friction Formulation
Made In America
Long Life, Low Rotor Wear, No Noise, No Dust
This Heavy Duty Fleet (HDM) Formulation is used on commercial and automotive fleet vehicles, police, emergency, and other extreme duty applications where a high-heat, long-life disc pad is required.
* Our Heavy Duty Semi-Metallic is our "Extreme High Heat" formulation providing an industry leading heat range of up to 1000 degrees Fahrenheit!
* Another major significance of our HDM formulation is that it does not exceed the Measure of Hardness (MOH rating) of the brake rotor. This ensures very long life of the disc pads and rotors (up to three times longer than competitors' pads) because the pads and rotors wear evenly throughout the life of the pad.
* These pads are post-press cured for twenty four hours for outstanding off the shelf performance and durability.
* This formulation contains no asbestos, no copper, and no lead. A Greener formulation for a better environment.
All these factors reduce the "Cost-Per-Mile" of a brake job which is the most important consideration for fleet operations when purchasing brake pads. This is what makes the Phoenix Friction Products HDM Brake Formulation the most cost-effective set of Disc Brake Pads on the market today!
Equivalent to: D370A, MKD370A
|
D0387 High Heat Formulation Disc Brake Pad Set - Ford, Mazda
Best In Class Friction Formulation
Made In America
Long Life, Low Rotor Wear, No Noise, No Dust
This Heavy Duty Fleet (HDM) Formulation is used on commercial and automotive fleet vehicles, police, emergency, and other extreme duty applications where a high-heat, long-life disc pad is required.
* Our Heavy Duty Semi-Metallic is our "Extreme High Heat" formulation providing an industry leading heat range of up to 1000 degrees Fahrenheit!
* Another major significance of our HDM formulation is that it does not exceed the Measure of Hardness (MOH rating) of the brake rotor. This ensures very long life of the disc pads and rotors (up to three times longer than competitors' pads) because the pads and rotors wear evenly throughout the life of the pad.
* These pads are post-press cured for twenty four hours for outstanding off the shelf performance and durability.
* This formulation contains no asbestos, no copper, and no lead. A Greener formulation for a better environment.
All these factors reduce the "Cost-Per-Mile" of a brake job which is the most important consideration for fleet operations when purchasing brake pads. This is what makes the Phoenix Friction Products HDM Brake Formulation the most cost-effective set of Disc Brake Pads on the market today!
Equivalent to: D387, MKD387
|
07-031 Clutch Kit: Ford Bronco, F150-350, E Series Van - 11"
This is an OE clutch kit sourced from one or more OE Manufacturers such as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or made by us at Phoenix Friction Products. The OE pressure plate and woven organic disc is ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.
This is a direct OE replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Equivalent to: K0033-01, 52802002
Other available clutch kits for this vehicle:
07-031.2DF Dual Friction, Engine Torque Capacity = 550 lb.ft., 400HP
07-031.2K Kevlar, Engine Torque Capacity = 495
lb.ft., 360HP
07-031.3C Ceramic, Engine Torque Capacity = 600
lb.ft., 435HP
07-031D Organic, Heavy Duty Disc, Engine Torque Capacity = 430
lb.ft., 315HP
|
(0) 
