|
Are you looking for:
|
28682 Precision Wheel Bearing Cone
Precision Heavy Duty Wheel Bearings are manufactured at factories that have ISO/TS 16949:2002 certified quality management systems. OEM customers of these factories include many of the largest US axle and trailer manufacturers. The factories start with bearing quality steel and forge & roll the steel into rings. The rings are then turned to the shape and size of the raceways of the bearing cone and cup. After the turning process, the rings are heat treated and quenched in a continuous atmosphere controlled furnace and then annealed to a hardness of 59 to 64 HRC. After heat treatment, the rings are machined to meet ABMA and other industry standard specifications. All raceways and rollers are super finished to insure smooth and quite operation while in service. All bearing components are then cleaned and protected with a rust inhibitor after final assembly. While the bearings are being manufactured the components are sample inspected after each manufacturing process to insure they meet all dimensional and visual specifications. The bearings then go through a 100% final inspection before they are packaged to leave the factory assuring customers the highest level of quality.
|
39590 Precision Wheel Bearing Cone
Precision Heavy Duty Wheel Bearings are manufactured at factories that have ISO/TS 16949:2002 certified quality management systems. OEM customers of these factories include many of the largest US axle and trailer manufacturers. The factories start with bearing quality steel and forge & roll the steel into rings. The rings are then turned to the shape and size of the raceways of the bearing cone and cup. After the turning process, the rings are heat treated and quenched in a continuous atmosphere controlled furnace and then annealed to a hardness of 59 to 64 HRC. After heat treatment, the rings are machined to meet ABMA and other industry standard specifications. All raceways and rollers are super finished to insure smooth and quite operation while in service. All bearing components are then cleaned and protected with a rust inhibitor after final assembly. While the bearings are being manufactured the components are sample inspected after each manufacturing process to insure they meet all dimensional and visual specifications. The bearings then go through a 100% final inspection before they are packaged to leave the factory assuring customers the highest level of quality.
|
01-017.3C Stage 3 Ceramic Clutch Kit: Jeep - 10½"
This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications. A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest of
the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this
vehicle:
01-017 Organic, Engine Torque Capacity = 300
lb.ft., 185HP
01-017.2DF Dual Friction, Engine Torque
Capacity = 380 lb.ft., 235HP
|
07-161.3C Stage 3 Ceramic Clutch Kit: Ford Mustang GT - 11"
This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The
kit features a Phoenix Friction high heat Ceramic spring dampened disc.
It will provide up to a 60% increase over the stock engine torque
capacity. At the same time, you will not notice any increase in pedal
effort over the stock clutch and offers chatter-resistant lift-off for a
great daily ride. Ceramic button discs will give you the fastest
shifts due to their low radial mass which reduces their overall flywheel
effect and works with all flywheels, including lightweight steel and
aluminum. You can expect 200% the life over original equipment woven
organic linings from Ceramic buttons under normal driving conditions.
These buttons will absorb the most energy of all the friction materials
and is the material of choice for the highest torque applications.
A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-161 Fibertuff, Engine Torque Capacity = 315 lb.ft., 315HP
07-161.2F Fibertuff, Engine Torque Capacity = 400 lb.ft., 400HP
07-161.2K Kevlar, Engine Torque Capacity = 360
lb.ft., 360HP
|
03-028CK Solid Flywheel Conversion Clutch Kit: BMW 318, Z3 - 8½"
This is an OE Solid Flywheel Conversion Clutch Kit. This Kit includes all parts required to change the Dual Mass Flywheel to a Solid Flywheel clutch Kit. The components are sourced from one or more OE Manufacturers such as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or Phoenix Friction Products. The OE flywheel, pressure plate, and woven organic disc is ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.
This is a direct OE replacement clutch kit and will not require any modifications during installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
03-028 Organic Replacement Kit (Used with Dual Mass Flywheel))
|
07-114.2K Stage 2 Kevlar Clutch Kit: Ford Mustang - 11"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-114 Organic, Engine Torque Capacity = 305
lb.ft., 305HP
07-114.3C Ceramic, Engine Torque Capacity = 425
lb.ft., 425HP
|
(0) 
