|
Are you looking for:
|
07-114.2K Stage 2 Kevlar Clutch Kit: Ford Mustang - 11"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-114 Organic, Engine Torque Capacity = 305
lb.ft., 305HP
07-114.3C Ceramic, Engine Torque Capacity = 425
lb.ft., 425HP
|
CRC119 Clutch Release Cable: Ford Fiesta
This is a new OE replacement Clutch Cable. The picture (when available) is of the actual product. If adjustments to the cable are no longer possible, replace the cable to ensure proper clutch release. For vehicle that are 15 years or older, it is advisable to replace the cable to avoid failure due to fatigue.
|
01-034 Clutch Kit: Jeep - 10½"
This is an OE clutch kit sourced from one or more OE Manufacturers such
as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or made by us at Phoenix
Friction Products. The premium OE pressure plate and woven organic disc
is ideal for maintaining the smooth engagement and reliability you are
used to from the original clutch when the vehicle was new. This is a
direct OE replacement clutch kit and will not require any modifications
during installation and includes all necessary components when
replacing your clutch.
Features:
- We use only quality clutch components that are engineered
to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement
for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested
to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in
workmanship
and materials
- Expert toll-free technical assistance is available
|
CMC523 Clutch Master Cylinder: VW Passat
This is a NEW OE replacement Master Cylinder. All hydraulic components are manufactured by OE manufacturers. The picture (when available) is of the actual product. If the master cylinder you are replacing is different in any way, please contact us for technical assistance. To ensure proper function, the hydraulic system MUST BE bled of all air using new DOT 3 brake fluid. The clutch pedal height and free play should be checked for proper adjustment. If the DOT 3 Fluid in the hydraulic system is not light-golden brown in color, the system has become contaminated and the fluid must be replaced. If the discoloration has a black tint, it is the result of the master or slave cylinder seals wearing out. In these cases, we strongly suggest replacing these components to avoid unnecessary costs later.
|
07-161 Clutch Kit: Ford Mustang GT - 11"
This is an OE clutch kit sourced from one or more OE Manufacturers such as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or made by us at Phoenix Friction Products. The OE pressure plate and woven organic disc are ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.
This is a direct OE replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Equivalent to: K70272-02, 52802005
Other available clutch kits for this vehicle:
07-161.2F Fibertuff, Engine Torque Capacity = 400 lb.ft., 400HP
07-161.2K Kevlar, Engine Torque Capacity = 360
lb.ft., 360HP
07-161.3C Ceramic, Engine Torque Capacity = 455
lb.ft., 455HP
|
01-035 Clutch Kit: Jeep - 10½"
This is an OE clutch kit sourced from one or more OE Manufacturers such
as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or made by us at Phoenix
Friction Products. The premium OE pressure plate and woven organic disc
is ideal for maintaining the smooth engagement and reliability you are
used to from the original clutch when the vehicle was new. This is a
direct OE replacement clutch kit and will not require any modifications
during installation and includes all necessary components when
replacing your clutch.
Features:
- We use only quality clutch components that are engineered
to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement
for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested
to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in
workmanship
and materials
- Expert toll-free technical assistance is available
Equivalent to: K1675-22, 52641401
|
(0) 
