|
Are you looking for:
|
07-022.2DF Stage 2 Dual Friction Clutch Kit: Ford F250 - 11"
This is a Phoenix Friction Stage 2 Dual Friction Street Performance
Clutch Kit. It will provide up to a 30% increase over the stock engine
torque capacity. At the same time, you will not notice any increase in
pedal effort over the stock clutch and offers chatter-resistant lift-off
for a great daily ride. The clutch disc has a bonded ceramic button
facing on the flywheel side and a
high quality woven organic facing on the pressure plate side for
smooth engagement and increased holding power.
A Phoenix Stage 2 Dual Friction Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-022 Organic, Engine Torque Capacity = 380 lb.ft., 250HP
07-022.3C Ceramic, Engine Torque Capacity = 530 lb.ft., 335HP
|
07-005 Clutch Kit: Ford Fairmont, Mustang, Mercury Capri, Zephyr - 10"
This is an OE clutch kit sourced from one or more OE Manufacturers such as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or made by us at Phoenix Friction Products. The OE pressure plate and woven organic disc is ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.
This is a direct OE replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Equivalent to: K0025-01, 52542001
Other available clutch kits for this vehicle:
07-005.2DF Dual Friction, Engine Torque Capacity = 305 lb.ft., 260HP
07-005.3C Ceramic, Engine Torque Capacity = 365
lb.ft., 310HP
|
04-019.2DF Stage 2 Dual Friction Clutch Kit: GM Cars - 10.4"
This is a Phoenix Friction Stage 2 Dual Friction Street Performance Clutch Kit. It will provide up to a 30% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. The clutch disc has a bonded ceramic button facing on the flywheel side and a
high quality woven organic facing on the pressure plate side for
smooth engagement and increased holding power.
A Phoenix Stage 2 Dual Friction Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
04-019 Organic, Engine Torque Capacity = 310 lb.ft., 370HP
04-019.2 Organic, Engine Torque Capacity = 390 lb.ft., 460HP
04-019.3C Ceramic, Engine Torque Capacity = 430 lb.ft., 510HP
04-019.4C Ceramic, Engine Torque Capacity = 535 lb.ft., 635HP
|
D0627A Ceramic Disc Pads: Rear - Mustang
Our Ceramic Formulation (C) consists of a non-ferrous formulation used on Asian and many domestic passenger vehicles where cool, clean and quiet operation is absolutely essential. Quieter by design and formulated to extend brake life.
Quieter by design and formulated to extend brake life, our Premium Ceramic formulation will provide you with industry leading performance and value. This is a very low dusting compound with extremely light gray dust particles. This brake pad has a very stable and linear friction profile which allows very effective ABS system performance.
All of our Premium Ceramic brake pads feature mechanically
attached, application specific constrained layer shims for superior
noise abatement. We highly recommend applying a small amount of heavy
molybdenum disulfide paste on all sliding metal contact surfaces.
Equivalent to:
|
07-114.2K Stage 2 Kevlar Clutch Kit: Ford Mustang - 11"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-114 Organic, Engine Torque Capacity = 305
lb.ft., 305HP
07-114.3C Ceramic, Engine Torque Capacity = 425
lb.ft., 425HP
|
04-080.2DF Stage 2 Dual Friction Clutch Kit: Corvette - 10¾"
This is a Phoenix Friction Stage 2 Dual Friction Street Performance
Clutch Kit. It will provide up to a 30% increase over the stock engine
torque capacity. At the same time, you will not notice any increase in
pedal effort over the stock clutch and offers chatter-resistant lift-off
for a great daily ride. The clutch disc has a bonded ceramic button facing on the flywheel side and a
high quality woven organic facing on the pressure plate side for
smooth engagement and increased holding power.
A Phoenix Stage 2 Dual Friction Street Performance product is a direct
factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
04-080 Organic, Engine Torque Capacity = 345 lb.ft., 265HP
|
(0) 
