|
Are you looking for:
|
04-197 Clutch Kit: Tracker, Vitara - 8½"
This is an OE clutch kit sourced from one or more OE Manufacturers such as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or made by us at Phoenix Friction Products. The OE pressure plate and woven organic disc is ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.
This is a direct OE replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Equivalent to: K0107-04, 52152201
|
H715311 Precision Wheel Bearing Cup
Precision Heavy Duty Wheel Bearings are manufactured at factories that have ISO/TS 16949:2002 certified quality management systems. OEM customers of these factories include many of the largest US axle and trailer manufacturers. The factories start with bearing quality steel and forge & roll the steel into rings. The rings are then turned to the shape and size of the raceways of the bearing cone and cup. After the turning process, the rings are heat treated and quenched in a continuous atmosphere controlled furnace and then annealed to a hardness of 59 to 64 HRC. After heat treatment, the rings are machined to meet ABMA and other industry standard specifications. All raceways and rollers are super finished to insure smooth and quite operation while in service. All bearing components are then cleaned and protected with a rust inhibitor after final assembly. While the bearings are being manufactured the components are sample inspected after each manufacturing process to insure they meet all dimensional and visual specifications. The bearings then go through a 100% final inspection before they are packaged to leave the factory assuring customers the highest level of quality.
|
D0655 High Heat Formulation Disc Brake Pad Set - Dodge, Ford
Best In Class Friction Formulation
Made In America
Long Life, Low Rotor Wear, No Noise, No Dust
This Heavy Duty Fleet (HDM) Formulation is used on commercial and automotive fleet vehicles, police, emergency, and other extreme duty applications where a high-heat, long-life disc pad is required.
* Our Heavy Duty Semi-Metallic is our "Extreme High Heat" formulation providing an industry leading heat range of up to 1000 degrees Fahrenheit!
* Another major significance of our HDM formulation is that it does not exceed the Measure of Hardness (MOH rating) of the brake rotor. This ensures very long life of the disc pads and rotors (up to three times longer than competitors' pads) because the pads and rotors wear evenly throughout the life of the pad.
* These pads are post-press cured for twenty four hours for outstanding off the shelf performance and durability.
* This formulation contains no asbestos, no copper, and no lead. A Greener formulation for a better environment.
All these factors reduce the "Cost-Per-Mile" of a brake job which is the most important consideration for fleet operations when purchasing brake pads. This is what makes the Phoenix Friction Products HDM Brake Formulation the most cost-effective set of Disc Brake Pads on the market today!
Equivalent to: D655A, MKD655A, 7677-D655
|
D0842S High Heat Formulation Disc Brake Pad Set - Mazda
Best In Class Friction Formulation
Made In America
Long Life, Low Rotor Wear, No Noise, No Dust
This Heavy Duty Fleet (HDM) Formulation is used on commercial and automotive fleet vehicles, police, emergency, and other extreme duty applications where a high-heat, long-life disc pad is required.
* Our Heavy Duty Semi-Metallic is our "Extreme High Heat" formulation providing an industry leading heat range of up to 1000 degrees Fahrenheit!
* Another major significance of our HDM formulation is that it does not exceed the Measure of Hardness (MOH rating) of the brake rotor. This ensures very long life of the disc pads and rotors (up to three times longer than competitors' pads) because the pads and rotors wear evenly throughout the life of the pad.
* These pads are post-press cured for twenty four hours for outstanding off the shelf performance and durability.
* This formulation contains no asbestos, no copper, and no lead. A Greener formulation for a better environment.
All these factors reduce the "Cost-Per-Mile" of a brake job which is the most important consideration for fleet operations when purchasing brake pads. This is what makes the Phoenix Friction Products HDM Brake Formulation the most cost-effective set of Disc Brake Pads on the market today!
Equivalent to: D842, MKD842, 7718-D842
|
D1165 Semi-Met Disc Pads: Front - Aston Martin, VW
Premium Semi-Metallic (M) – the standard formula for higher heat applications. Ideal for mid to full-size cars, pickups, SUV's, and European vehicles.
Our premium Semi-Metallic is suitable across many platforms and offers excellent stable performance and superior brake service life. This formulation uses only premium raw materials including the highest quality carbon available for low dust, quiet operation, and cleaner brake components.
All of our Premium Semi-Metallic brake pads feature mechanically attached, application specific constrained layer shims for superior noise abatement. We highly recommend applying a small amount of heavy molybdenum disulfide paste on all sliding metal contact surfaces.
Equivalent to:
|
D0387 High Heat Formulation Disc Brake Pad Set - Ford, Mazda
Best In Class Friction Formulation
Made In America
Long Life, Low Rotor Wear, No Noise, No Dust
This Heavy Duty Fleet (HDM) Formulation is used on commercial and automotive fleet vehicles, police, emergency, and other extreme duty applications where a high-heat, long-life disc pad is required.
* Our Heavy Duty Semi-Metallic is our "Extreme High Heat" formulation providing an industry leading heat range of up to 1000 degrees Fahrenheit!
* Another major significance of our HDM formulation is that it does not exceed the Measure of Hardness (MOH rating) of the brake rotor. This ensures very long life of the disc pads and rotors (up to three times longer than competitors' pads) because the pads and rotors wear evenly throughout the life of the pad.
* These pads are post-press cured for twenty four hours for outstanding off the shelf performance and durability.
* This formulation contains no asbestos, no copper, and no lead. A Greener formulation for a better environment.
All these factors reduce the "Cost-Per-Mile" of a brake job which is the most important consideration for fleet operations when purchasing brake pads. This is what makes the Phoenix Friction Products HDM Brake Formulation the most cost-effective set of Disc Brake Pads on the market today!
Equivalent to: D387, MKD387
|
(0) 
