|
Are you looking for:
|
07-027L Lever Style Clutch Kit: Ford 11 x 10T"
This is a Lever Style (Three Finger) style clutch kit. This style
pressure plate was the OE style for the listed applications. This
pressure plate and woven organic disc is ideal for maintaining the
smooth engagement and reliability you are used to from the original
clutch when the vehicle was new.
This is a direct OE replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-027 Organic, Engine Torque Capacity = 300 lb.ft., 300HP
07-027.2DF Dual Friction, Engine Torque Capacity = 345 lb.ft., 345HP
07-027.3C Ceramic, Engine Torque Capacity = 390 lb.ft., 390HP
07-027DZ Organic, Heavy Duty Disc, Engine Torque Capacity = 300 lb.ft., 300HP
07-027F Organic, Fleet Duty, Engine Torque Capacity = 300 lb.ft., 300HP
|
06-050.4C Stage 4 Heavy Duty Ceramic Clutch Kit: Nissan Pulsar - 8½"
This is a Phoenix Friction Stage 4 Street Performance Clutch Kit. This
kit features a High Clamp Pressure Plate and a Phoenix Friction high
heat Ceramic spring dampened disc. It will provide up to a 80% increase
over the stock engine torque capacity. At the same time, you will only
notice a slight increase in pedal effort over the stock clutch and
offers chatter-resistant lift-off for a great daily ride. Our Ceramic
button discs will give you the fastest shifts due to their low radial
mass which reduces their overall flywheel effect and works with all
flywheels, including lightweight steel and aluminum. You can expect 200%
the life over original equipment woven organic linings from Ceramic
buttons under normal driving conditions. These buttons will absorb the
most energy of all the friction materials and is the material of choice
for the highest torque applications.
A Phoenix Stage 4 Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
06-050 Organic, Engine Torque Capacity = 170 lb.ft., 210HP
06-050.3 Organic, Engine Torque Capacity = 220 lb.ft., 270HP
06-050.3C Ceramic, Engine Torque Capacity = 300 lb.ft., 370HP
|
CMC181PF Pre-Filled Clutch Master Cylinder: Ford Ranger
This is a NEW OE replacement Pre-Filled Master Cylinder. All hydraulic components are manufactured by OE manufacturers. The picture (when available) is of the actual product. If the master cylinder you are replacing is different in any way, please contact us for technical assistance. To ensure proper function, the hydraulic system MUST BE bled of all air using new DOT 3 brake fluid. The clutch pedal height and free play should be checked for proper adjustment. If the DOT 3 Fluid in the hydraulic system is not light-golden brown in color, the system has become contaminated and the fluid must be replaced. If the discoloration has a black tint, it is the result of the master or slave cylinder seals wearing out. In these cases, we strongly suggest replacing these components to avoid unnecessary costs later.
|
07-022.2DF Stage 2 Dual Friction Clutch Kit: Ford F250 - 11"
This is a Phoenix Friction Stage 2 Dual Friction Street Performance
Clutch Kit. It will provide up to a 30% increase over the stock engine
torque capacity. At the same time, you will not notice any increase in
pedal effort over the stock clutch and offers chatter-resistant lift-off
for a great daily ride. The clutch disc has a bonded ceramic button
facing on the flywheel side and a
high quality woven organic facing on the pressure plate side for
smooth engagement and increased holding power.
A Phoenix Stage 2 Dual Friction Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-022 Organic, Engine Torque Capacity = 380 lb.ft., 250HP
07-022.3C Ceramic, Engine Torque Capacity = 530 lb.ft., 335HP
|
04-019.2DF Stage 2 Dual Friction Clutch Kit: GM Cars - 10.4"
This is a Phoenix Friction Stage 2 Dual Friction Street Performance Clutch Kit. It will provide up to a 30% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. The clutch disc has a bonded ceramic button facing on the flywheel side and a
high quality woven organic facing on the pressure plate side for
smooth engagement and increased holding power.
A Phoenix Stage 2 Dual Friction Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
04-019 Organic, Engine Torque Capacity = 310 lb.ft., 370HP
04-019.2 Organic, Engine Torque Capacity = 390 lb.ft., 460HP
04-019.3C Ceramic, Engine Torque Capacity = 430 lb.ft., 510HP
04-019.4C Ceramic, Engine Torque Capacity = 535 lb.ft., 635HP
|
04-080.2DF Stage 2 Dual Friction Clutch Kit: Corvette - 10¾"
This is a Phoenix Friction Stage 2 Dual Friction Street Performance
Clutch Kit. It will provide up to a 30% increase over the stock engine
torque capacity. At the same time, you will not notice any increase in
pedal effort over the stock clutch and offers chatter-resistant lift-off
for a great daily ride. The clutch disc has a bonded ceramic button facing on the flywheel side and a
high quality woven organic facing on the pressure plate side for
smooth engagement and increased holding power.
A Phoenix Stage 2 Dual Friction Street Performance product is a direct
factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
04-080 Organic, Engine Torque Capacity = 345 lb.ft., 265HP
|
(0) 
