|
Are you looking for:
|
CRC150 Clutch Release Cable: Plymouth Sapporo
This is a new OE replacement Clutch Cable. The picture (when available) is of the actual product. If adjustments to the cable are no longer possible, replace the cable to ensure proper clutch release. For vehicle that are 15 years or older, it is advisable to replace the cable to avoid failure due to fatigue.
|
02-041.2K Stage 2 Kevlar Clutch Kit: Audi S4 - 9½"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered
to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement
for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested
to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in
workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
02-041 Organic, Engine Torque Capacity = 265 lb.ft., 295HP
|
07-306.2K Stage 2 Kevlar Clutch Kit: Ford Mustang 4.0L - 10"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-306 Organic, Engine Torque Capacity = 240 lb.ft., 250HP
07-306.3C Ceramic, Engine Torque Capacity = 335 lb.ft., 340HP
|
04-194.2K Stage 2 Kevlar Clutch Kit: Cavalier, Sunfire - 8½"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch.Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
04-194 Organic, Engine Torque Capacity = 135 lb.ft., 130HP
04-194iF.2K Kevlar, Engine Torque Capacity = 160 lb.ft., 1555HP (includes Flywheel)
|
07-162.2K Stage 2 Kevlar Clutch Kit: Ford Mustang SVT Cobra - 11"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-162 Organic, Engine Torque Capacity = 390 lb.ft., 450HP
07-162.2 Organic, Engine Torque Capacity = 455 lb.ft., 520HP
|
06-046.2K Stage 2 Kevlar Clutch Kit: Nissan 300ZX - 10"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
06-046 Organic, Engine Torque Capacity = 285 lb.ft., 300HP
|
(0) 
