|
Are you looking for:
|
FW609 Flywheel: Ford Fairlane, Fairmont, Falcon, Granada, LTD, Mustang
This is NEW OE replacement Flywheel. The picture (when available) is of the actual product, and shows both sides. If the flywheel you are replacing is different in any way, please contact us for technical assistance. Flywheels that have too much material removed can affect the clutch release in hydraulic release systems. Is some cases, the flywheel cannot be resurfaced. In these cases, the flywheel is sold as part of the clutch kit.
|
D0338 No/Low-Met Disc Pads: Front - Volkswagen Van
Our Non-Asbestos, No or Low Metallic Formulation (N) is generally used on earlier vehicles with larger rotors or in the rear of a vehicle where heat was not an over-riding issue.
Our non-asbestos low-metallic formulation pads (N) are an ideal replacement for the original OE asbestos disc pads that were typically found in older model applications, when asbestos materials where commonly used. Our modern low-metallic disc pads formulations provide great performance and stopping power at an affordable price
All of our Non-Asbestos, No or Low Metallic brake pads feature mechanically
attached, application specific constrained layer shims when required by OEM specifications for superior
noise abatement. We highly recommend applying a small amount of heavy
molybdenum disulfide paste on all sliding metal contact surfaces.
Equivalent to:
|
D0408M Semi-Met Disc Pads: Rear - Jaguar with Male Connector
Premium Semi-Metallic (M) – the standard formula for higher heat applications. Ideal for mid to full-size cars, pickups, SUV's, and European vehicles.
Our premium Semi-Metallic is suitable across many platforms and offers excellent stable performance and superior brake service life. This formulation uses only premium raw materials including the highest quality carbon available for low dust, quiet operation, and cleaner brake components.
All of our Premium Semi-Metallic brake pads feature mechanically attached, application specific constrained layer shims for superior noise abatement. We highly recommend applying a small amount of heavy molybdenum disulfide paste on all sliding metal contact surfaces.
Equivalent to:
|
CMC387 Clutch Master Cylinder: Kia Sephia, Spectra
This is a NEW OE replacement Master Cylinder. All hydraulic components are manufactured by OE manufacturers. The picture (when available) is of the actual product. If the master cylinder you are replacing is different in any way, please contact us for technical assistance. To ensure proper function, the hydraulic system MUST BE bled of all air using new DOT 3 brake fluid. The clutch pedal height and free play should be checked for proper adjustment. If the DOT 3 Fluid in the hydraulic system is not light-golden brown in color, the system has become contaminated and the fluid must be replaced. If the discoloration has a black tint, it is the result of the master or slave cylinder seals wearing out. In these cases, we strongly suggest replacing these components to avoid unnecessary costs later.
|
CSC001 Concentric Slave Cylinder: Ford Aerostar, Ranger
This is a NEW OE replacement Slave Cylinder. All hydraulic components are manufactured by OE manufacturers. The picture (when available) is of the actual product. If the master cylinder you are replacing is different in any way, please contact us for technical assistance. To ensure proper function, the hydraulic system MUST BE bled of all air using new DOT 3 brake fluid. The clutch pedal height and free play should be checked for proper adjustment. If the DOT 3 Fluid in the hydraulic system is not golden in color, the system has become contaminated and the fluid must be replaced. If the discoloration has a black tint, it is the result of the master or slave cylinder seals wearing out. In these cases, we strongly suggest replacing these components to avoid unnecessary costs later.
|
CSC601 Concentric Slave Cylinder: Chevrolet Cobalt
This is a NEW OE replacement Slave Cylinder. All hydraulic components are manufactured by OE manufacturers. The picture (when available) is of the actual product. If the master cylinder you are replacing is different in any way, please contact us for technical assistance. To ensure proper function, the hydraulic system MUST BE bled of all air using new DOT 3 brake fluid. The clutch pedal height and free play should be checked for proper adjustment. If the DOT 3 Fluid in the hydraulic system is not golden in color, the system has become contaminated and the fluid must be replaced. If the discoloration has a black tint, it is the result of the master or slave cylinder seals wearing out. In these cases, we strongly suggest replacing these components to avoid unnecessary costs later.
|
(0) 
