|
Are you looking for:
|
07-161.3C Stage 3 Ceramic Clutch Kit: Ford Mustang GT - 11"
This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The
kit features a Phoenix Friction high heat Ceramic spring dampened disc.
It will provide up to a 60% increase over the stock engine torque
capacity. At the same time, you will not notice any increase in pedal
effort over the stock clutch and offers chatter-resistant lift-off for a
great daily ride. Ceramic button discs will give you the fastest
shifts due to their low radial mass which reduces their overall flywheel
effect and works with all flywheels, including lightweight steel and
aluminum. You can expect 200% the life over original equipment woven
organic linings from Ceramic buttons under normal driving conditions.
These buttons will absorb the most energy of all the friction materials
and is the material of choice for the highest torque applications.
A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-161 Fibertuff, Engine Torque Capacity = 315 lb.ft., 315HP
07-161.2F Fibertuff, Engine Torque Capacity = 400 lb.ft., 400HP
07-161.2K Kevlar, Engine Torque Capacity = 360
lb.ft., 360HP
|
RFW0120 FW: Reground - Toyota Corolla, MR-2, Chevy Nova
This is a resurfaced flywheel. The picture (when available) is of the actual product, and shows both sides. If the flywheel you are replacing is different in any way, please contact us for technical assistance. All resurfaced flywheels we sell have only been resurfaced once. Most flywheels can be resurfaced twice without affecting release, however, flywheels that have too much material removed can affect the clutch release in hydraulic release systems.
|
07-114.2K Stage 2 Kevlar Clutch Kit: Ford Mustang - 11"
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an OE Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.
A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to
function as a matched set and work the way they should with the rest
of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the
original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the
Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship
and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-114 Organic, Engine Torque Capacity = 305
lb.ft., 305HP
07-114.3C Ceramic, Engine Torque Capacity = 425
lb.ft., 425HP
|
BR 62087 Brake Rotor: Front - Buick, Chevrolet, Pontiac
A high quality, direct fit OE replacement brake disc.
|
16-069 Clutch Kit: Toyota 4Runner, Pickup, Tacoma - 9¼"
This is an OE clutch kit sourced from one or more OE Manufacturers such as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or made by us at Phoenix Friction Products. The OE pressure plate and woven organic disc is ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new. This is a direct OE replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch.
Other available clutch kits for this vehicle:
16-069.2 Organic, Engine Torque Capacity = 250 lb.ft., 220HP
16-069.2DF Dual Friction, Engine Torque Capacity = 200 lb.ft., 175HP
Equivalent to: K70062-03, 52365203
|
D1165 Semi-Met Disc Pads: Front - Aston Martin, VW
Premium Semi-Metallic (M) – the standard formula for higher heat applications. Ideal for mid to full-size cars, pickups, SUV's, and European vehicles.
Our premium Semi-Metallic is suitable across many platforms and offers excellent stable performance and superior brake service life. This formulation uses only premium raw materials including the highest quality carbon available for low dust, quiet operation, and cleaner brake components.
All of our Premium Semi-Metallic brake pads feature mechanically attached, application specific constrained layer shims for superior noise abatement. We highly recommend applying a small amount of heavy molybdenum disulfide paste on all sliding metal contact surfaces.
Equivalent to:
|
(0) 
