05-073.2K Stage 2 Kevlar Clutch Kit: Dodge Pickups 1988 - 1977 5.9L Cummins Diesel - 12-1/4 in.

This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an original stock pressure plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions.

Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.

A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

05-073          Organic, Engine Torque Capacity = 450 lb.ft., 235HP
05-073.3       Organic, Engine Torque Capacity = 615 lb.ft., 325HP
05-073.3C     Ceramic, Engine Torque Capacity = 625 lb.ft., 330HP
05-073.4C     Ceramic, Engine Torque Capacity = 850 lb.ft., 450HP

05-073iF.3C  Ceramic, Engine Torque Capacity = 625 lb.ft., 330HP (includes 1994-1997 Flywheel)
05-073iF.4C   Ceramic, Engine Torque Capacity = 850 lb.ft., 450HP (includes 1994-1997 Flywheel)

To determine the horsepower added by performance modifications, click here

Used with the New Venture NV4500HD 5 Speed Transmission

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Kevlar 12-1/4" x 10T x 1-1/4" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool, Clutch Mounting Bolts
Engine Torque = 515 lb-ft., 265HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 17 lb.ft.
Flywheel to Crank Mounting Bolts: 101 lb.ft.

See TB024 regarding clutch combinations

Refer to the technical bulletin TB044 regarding the proper clutch fork orientation during replacement.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: