05-073.3 Stage 3 Heavy Duty Clutch Kit: Dodge Pickups 1988 - 1997 5.9L Cummins Diesel - 12-1/4 in.

This is a Phoenix Friction Stage 3 Clutch Kit with an High Clamp Load Pressure Plate and a premium woven organic clutch disc. This kit will provide a 35% increase in Engine Torque over the OE clutch kit with only a slight increase in pedal pressure. The premium woven organic disc is ideal for maintaining the smooth engagement you are used to from the original clutch when the vehicle was new and the high clamp load pressure plate offers greater torque capacity when making light modifications to the engine. This is a complete clutch kit and includes all necessary components when replacing your clutch.

This kit is a direct OE replacement Performance Clutch Kit and will not require any modifications during installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

05-073          Organic, Engine Torque Capacity = 450 lb.ft., 235HP
05-073.2K     Kevlar, Engine Torque Capacity = 515 lb.ft., 265HP
05-073.3C     Ceramic, Engine Torque Capacity = 625 lb.ft., 330HP
05-073.4C     Ceramic, Engine Torque Capacity = 850 lb.ft., 450HP

05-073iF.3C  Ceramic, Engine Torque Capacity = 625 lb.ft., 330HP (includes 1994-1997 Flywheel)
05-073iF.4C   Ceramic, Engine Torque Capacity = 850 lb.ft., 450HP (includes 1994-1997 Flywheel)

To determine the horsepower added by performance modifications, click here

Used with the New Venture NV4500HD 5 Speed Transmission

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 12-1/4" x 10T x 1-1/4" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool, Clutch Mounting Bolts
Engine Torque = 615 lb-ft., 325HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 17 lb.ft.
Flywheel to Crank Mounting Bolts: 101 lb.ft.

See TB024 regarding clutch combinations

Refer to the technical bulletin TB044 regarding the proper clutch fork orientation during replacement.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: