05-073.4C Stage 4 Heavy Duty Ceramic Clutch Kit: Dodge Pickups 5.9L Cummins Diesel - 12-1/4 in.

This is a Phoenix Friction Stage 4 Street Performance Clutch Kit. This kit features a High Clamp Pressure Plate and a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 80% increase over the stock engine torque capacity. At the same time, you will only notice a slight increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. Our Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.

This Phoenix Stage 3 Street Performance product may require a flywheel modifications for installation. See the Specifications tab for more information.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

05-073          Organic, Engine Torque Capacity = 450 lb.ft., 235HP
05-073.2K     Kevlar, Engine Torque Capacity = 515 lb.ft., 265HP
05-073.3       Organic, Engine Torque Capacity = 615 lb.ft., 325HP
05-073.3C     Ceramic, Engine Torque Capacity = 625 lb.ft., 330HP

05-073iF.3C  Ceramic, Engine Torque Capacity = 625 lb.ft., 330HP (includes 1988-1997 Flywheel)
05-073iF.4C   Ceramic, Engine Torque Capacity = 850 lb.ft., 450HP (includes 1988-1997 Flywheel)

To determine the horsepower added by performance modifications, click here

Used with the New Venture NV4500HD 5 Speed Transmission

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic 12-1/4" x 10T x 1-1/4" Dampened Push
Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool, Clutch Mounting Bolts
Engine Torque = 850 lb-ft., 450HP The OEM flywheel may not accept the heavy duty disc in this kit. The Flywheel Crank Bore must be 7-1/2" or greater for the heavy duty disc to fit. If you are not sure, order FW151 for 1988 - 1993 Dodge D or W Series Pickups or FW151 for 1994 - 1997 Ram Series Pickup.

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 17 lb.ft.
Flywheel to Crank Mounting Bolts: 101 lb.ft.

See TB024 regarding clutch combinations

Refer to the technical bulletin TB044 regarding the proper clutch fork orientation during replacement.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: