06-042.3C Stage 3 Ceramic Clutch Kit: Nissan D21 Pathfinder, Pickup V6 3.0L - 10 in.

This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.

A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

06-042           Organic, Engine Torque Capacity = 210 lb.ft., 195HP
06-042.2DF     Dual Friction, Engine Torque Capacity = 260 lb.ft., 240HP
06-042.2K       Kevlar, Engine Torque Capacity = 245 lb.ft., 225HP

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic 10" x 24T x 1" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bushing, Alignment Tool
Engine Torque = 295 lb-ft., 270HP

Per Nissan Technical Bulletin NTB95-114:

In order to ensure the proper release of the pressure plate, the clutch release slave cylinder needs to be upgraded to the newer dual cup design. Failure to do so will void warranty protection on any clutch parts installed on this vehicle.

There are no comments for this product.

Fits: