07-069S Clutch Kit including Retainer Repair Sleeve: Ford Escort, Tempo, Mercury Topaz - 8-1/2 in.

This kit contains an over-sized Release Bearing to accommodate a transmission bearing retainer repair sleeve that is also included with the kit.  The only other way to repair a worn retainer on this transmission is to replace the entire transmission case.

The components in this clutch kit are sourced from one or more OE Manufacturers such as Aisin, Exedy (Daikin), Luk, Sachs, Valeo, or made by us at Phoenix Friction Products. The original stock pressure plate and woven organic disc are ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.

This is a direct stock replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch.

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

07-069      OE kit with standard release bearing

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 8-1/2" x 20T x 7/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Over-Sized Release Bearing, Steel Retainer Repair Sleeve, Alignment Tool

Refer to the technical bulletin TB011 regarding the installation of a steel wear sleeve on the aluminum bearing retainer.

Refer to the technical bulletin TB017 regarding possible "Hard Pedal" condition worn plastic bushings supporting the release bearing cross-shaft.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: