07-501CK Solid Flywheel Conversion Clutch Kit: Ford 7.3L Powerstroke Diesel F250 F350 F450 Pickup - 13 in.

This is a stock replacement Solid Flywheel Conversion Clutch Kit. This Kit includes all parts required to change the Dual Mass Flywheel to a Solid Flywheel clutch Kit. All clutch kit components are sourced from ISO 9000 quality assured manufacturers. The OE flywheel, pressure plate, and woven organic disc are ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.

This is a direct stock replacement clutch kit and will not require any modifications during installation. The original pressure plate and flywheel bolts are used when replacing these components.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

07-501            Organic, Engine Torque Capacity = 530 lb.ft., 275HP
07-501.3         Organic, Engine Torque Capacity = 685 lb.ft., 355HP
07-501.3C       Ceramic, Engine Torque Capacity = 750 lb.ft., 400HP
07-501.4C       Ceramic, Engine Torque Capacity = 975 lb.ft., 500HP

07-501CK.3     Organic, Engine Torque Capacity = 685 lb.ft., 355HP (includes flywheel)
07-501CK.3C   Ceramic, Engine Torque Capacity = 750 lb.ft., 400HP (includes flywheel)
07-501CK.4C   Ceramic, Engine Torque Capacity = 975 lb.ft., 500HP (includes flywheel)

To determine the horsepower added by performance modifications, click here

To see comments and suggestions regarding transmission gear rattle, click here

This is a Valeo type Solid Flywheel Conversion kit.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 13" x 10T x 1-1/4" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Flywheel, Pilot Bearing, Alignment Tool, Pressure Plate Mounting Bolts, Flywheel Mounting Bolts
Engine Torque = 530 lb-ft., 275HP

Bolt Tightening Specs:
Pressure Plate Mounting Bolts: 21 lb.ft.
Flywheel to Crank Mounting Bolts: 87-91 lb.ft.

Refer to the technical bulletin TB031 regarding possible "No Release" issue and the use of Upgraded Hydraulics.
Covers 1993-1995 7.3L DIESEL and 7.5L GAS Ford F250, F350, and F450 Super Duty

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: