This is an Exedy Stage 2 Thin clutch Kit with a high clamp load pressure plate and a ceramic button clutch disc. This kit will provide up to a 75% increase in Engine Torque over the OE clutch kit with only a slight increase in pedal pressure. 

Features:

• Cerametallic Friction Disc
  • Exedy cerametallic clutches are designed to handle the abuse of high power modified engines.  These cerametallic friction materials can handle much more abuse than stock type disc assemblies without slipping and fading. The "thin" discs offer greatly reduced inertia to improve shift effort, allow for quicker shifting, and improve synchro durability.  These discs are approximately ½ the thickness of a stock disc and are recommended for circuit track use only.

• Clutch Cover
  • These clutch covers are designed to achieve a clamping load that is approximately 40% higher than the genuine part allowing higher torque transmitting capacity.  Ductile material is used for all pressure plates and high burst strength can be achieved in all temperature ranges.

This Exedy Stage 2 clutch kit is a direct OE replacement Performance Clutch Kit and will not require any modifications during installation. This is a complete clutch kit and includes all necessary components when replacing your clutch.

Other available clutch kits for this vehicle:

15-023              Organic, Engine Torque Capacity = 235 lb.ft., 275HP
15-023.2K         Kevlar, Engine Torque Capacity = 265 lb.ft., 305HP
15-023.3C         Ceramic, Engine Torque Capacity = 325 lb.ft., 375HP
15-802.2           Organic, Exedy, Engine Torque Capacity = 350 lb.ft., 400HP

15-023iFS         Organic, Engine Torque Capacity = 235 lb.ft., 275HP (includes Billet Steel Flywheel)
15-023iFS.3C    Ceramic, Engine Torque Capacity = 325 lb.ft., 375HP (includes Billet Steel Flywheel)

Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate) There are no comments for this product.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic Button 8-7/8" x 24T x 1" Dampened Pull
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 395 lb-ft., 455HP