Start Here

Using the vehicle selector to the right will present you with the correct selection of parts relevant to your specific vehicle.

DMF002 Dual Mass Flywheel: Ford 7.3L Diesel

The company reserves the right to substitute components of equal quality from time to time to continue to make the part available for purchase.

DMF002 Dual Mass Flywheel: Ford 7.3L Diesel

This may be a good time to consider doing a Solid Flywheel Conversion. The Conversion Kit that has the same rating as the original clutch is located here.
In Stock
MSRP: $1749.69
Regular Price: $1,083.39
On Sale For: $1,029.19

This item qualifies for Free Shipping!

Part #: DMF002
Brand: Phoenix Friction Products
Weight: 71
This is NEW OE Dual Mass Flywheel. All Dual Mass Flywheels are manufactured by OE manufacturers. The picture (when available) is of the actual product, and shows both sides. If the flywheel you are replacing is different in any way, please contact us for technical assistance. 

Dual mass flywheels are constructed to absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual mass flywheels cannot be resurfaced.


  • Dual-mass flywheels absorb engine vibrations
  • Built-in damper designed to isolate engine torque spikes and prevent transmission damage
  • All new
  • Engineered and built to original-equipment specifications

Also see Specifications for additional product information.

Untitled Document
Flywheel Weight (Pounds)  65.7 lbs
Flywheel Step (Inches)  0.00''
PP Bolt Circle (Inches)  12.375''
Dowel Pin Size (Inches)  0.00''
Flat or Step  Flat
Pressure Plate Bolt Pattern  6 Holes groups of 2
Dowel Pin Location  No dowel pin
Crank Center Hole Dia (Inches)  2.045''
Crank Mating Surface to PP Mounting Surface (Inches)  2.55''
Crank Bolt Circle Diameter (Inches)  3.19''
Number of Crank Holes 9
Crank Bolt Hole Size (Inches)  0.41''
Counter Bore Diameter (PP) (Inches)  6.37''
Counter Bore Depth (Inches)  0.333''
Pressure Plate Bolt Hole thread size (Metric or Inches)  5/16 X 18
Number of Teeth 155
Ring Gear Outside Diameter (Inches)  15.7''
Ring Gear Inside Diameter (Inches)  14.485''
Customer Reviews
# of Ratings: 0
There are no comments for this product.
Shipping Estimate: