Start Here

Using the vehicle selector to the right will present you with the correct selection of parts relevant to your specific vehicle.

DMF058 Dual Mass Flywheel: Dodge Ram 2500 3500 4500 5500 5.9L 6.7L Diesel with G56 transmission

Actual product(s) shown.

DMF058 Dual Mass Flywheel: Dodge Ram 2500 3500 4500 5500 5.9L 6.7L Diesel with G56 transmission

This may be a good time to consider doing a Solid Flywheel Conversion.  The Conversion Kit that has the same rating as the original clutch is located here.
In Stock
MSRP: $705.47
Price: $478.39

This item qualifies for Free Shipping!


Part #: DMF058
Brand: Phoenix Friction Products
Weight: 75
Handling Time: 1-2 days
This is NEW OE Dual Mass Flywheel. All Dual Mass Flywheels are manufactured by OE manufacturers. The picture (when available) is of the actual product, and shows both sides. If the flywheel you are replacing is different in any way, please contact us for technical assistance.

A dual mass flywheel (DMF) absorbs vibrations from the engine through the transmission input shaft and on through the rest of the drivetrain. The DMF minimizes Gear Roll-over noise generated in manual transmissions that are mostly filled with automatic transmission fluid these days. The reason it is called a dual mass flywheel is that there are two plates joined by a bearing and dampner spring assembly that often includes a friction pack as well. The first plate mounts to the crankshaft and has the starter ring gear on it. The second plate is where the pressure plate bolts to.

This type of flywheel is not recommended with performance clutches due to it's designed torque limitation. In addition, when used in towing applications, the weight of the towed load can adversely affect the life expectancy of this type of flywheel. As such we do not warrant this flywheel when used in either heavy towing or performance applications..

These flywheels cannot be resurfaced because the resulting grinding grit will damage the internal components.

This is a direct factory replacement part and no modifications are necessary to make it fit.

Important Note:
The OE setup had an adapter plate between the crank & flywheel. If this is missing, order the following parts from a Dodge dealer: 1 of 52104720AE (adapter plate), 1 of 04798968 (backing plate), 8 of 06508033AA, and 6 of 06033439.

Bolt 06508033AA is M10 x 1.5 x 25.0. Bolt 06033439 is 3/8-24 x 0.550".
Customer Reviews
(0.00)
# of Ratings: 0
There are no comments for this product.
Shipping Estimate:

Fits