08-026.4C Stage 4 Ceramic Clutch Kit: Acura Integra, Honda Civic Del Sol, Civic Si, CR-V - 8-5/8 in.

This is a Phoenix Friction Stage 4 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 80% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.

A Phoenix Stage 4 Street Performance product is a direct factory fit and requires no modifications for installation.It is a complete clutch kit and includes all necessary components when replacing your clutch.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

08-026            Organic, Engine Torque Capacity = 140 lb.ft., 150HP
08-026.2         Organic, Engine Torque Capacity = 220 lb.ft., 240HP
08-026.2K       Kevlar, Engine Torque Capacity = 160 lb.ft., 170HP
08-026.3C       Ceramic, Engine Torque Capacity = 185 lb.ft., 200HP
08-026.3K       Kevlar, Engine Torque Capacity = 250 lb.ft., 275HP

08-026iF          Organic, Engine Torque Capacity = 220 lb.ft., 240HP (includes flywheel)
08-026iF.3C     Ceramic, Engine Torque Capacity = 185 lb.ft., 200HP (includes flywheel)

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic Button 8-5/8" x 24T x 1-1/32" Dampened Push
Kit Includes: Pressure Plate, Ceramic Disc, Release Bearing, Pilot Bearing, Pilot Bushing, Alignment Tool
Engine Torque = 300 lb-ft., 325HP

This product does not have any applicable Technical Bulletins at this time.

Fits: