07-153.3 Stage 3 Extra Heavy Duty Organic Clutch Kit: Ford 7.3L Powerstroke Diesel F250 F350 F450 F550 Super Duty Pickup - 13 in.

This is a Phoenix Friction Stage 3 Clutch Kit with an High Clamp Load Pressure Plate and an Heavy Duty woven organic clutch disc. The kit features a Phoenix Friction Heavy Duty clutch disc with High Torque Dampeners mated to a Thrust Stop Hub and featuring High-Heat Woven Organic facings. The Extra High Clamp pressure plate offers increased torque capacity with only a small increase in pedal pressure. The Heavy Duty woven organic disc offers the smooth engagement and control that you are used to. Highly recommended for heavier towing applications.

This kit is a direct OE replacement Performance Clutch Kit and will not require any modifications during installation.  The kit is a complete clutch kit and includes all necessary components when replacing your clutch.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available
   

Other available clutch kits for this vehicle:

For towing applications
07-153         Organic, Engine Torque Capaity = 505 lb.ft., 280 HP
07-153.2      Organic, Engine Torque Capacity = 605 lb.ft., 335HP
07-153.3      Organic, Engine Torque Capacity = 685 lb.ft., 380HP (current selection)
07-153.4      Organic, Engine Torque Capacity = 785 lb.ft., 435HP

For performance applications
07-153.3C    Ceramic, Engine Torque Capacity = 705 lb.ft., 390HP
07-153.4C    Ceramic, Engine Torque Capacity = 845 lb.ft., 470HP
07-153.5C    Ceramic, Engine Torque Capacity = 955 lb.ft., 530HP
07-153.6C    Ceramic, Engine Torque Capacity = 1100lb.ft.. 610HP

The following versions of the above kits contain a new flywheel as well

For towing applications
07-153iF       Organic, Engine Torque Capacity = 505 lb.ft., 280HP (includes flywheel)

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 13" x 10T x 1-3/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 685 lb-ft., 380HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 21 lb.ft.
Flywheel to Crank Mounting Bolts: 89 lb.ft.

Refer to the technical bulletin TB039 if the vehicle is experiencing poor or no release and the hydraulics are fine. This technical bulletin discusses an upgrade to the clutch fork and fork anchor.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: