01800 Exedy Stage 1 Organic Racing Clutch Kit: Dodge Dakota Jeep Cherokee Grand Cherokee Wrangler - 265mm

This is an EXEDY Stage 1 clutch Kit with a high clamp load pressure plate. This kit will provide a 60% increase in Engine Torque over the OE clutch kit with only a slight increase in pedal pressure. The high performance woven organic disc are ideal for maintaining the smooth engagement you are used to from the original clutch when the vehicle was new and the high clamp load pressure plate offers greater torque capacity when making light modifications to the engine.

Features:

• Heavy Duty Organic Disc
  • Newly developed asbestos free friction facing is used which has high heat resistance and high burst strength characteristics.  No steel back is required which can cause high RPM "Lock-out" and/or synchro damage.  Superior in shift operations and half-engagement feel, this clutch disc is recommended for any sports/performance use. Special oil-quenched damper spring covers are used as well as extra thick rivet heads to retain the facings more securely.


• Ultra Fiber Friction Material
  • This advanced facing material provides the high heat resistance essential for motorsports.  It was developed by reviewing both the copper wire ratio and the composition of the high strength fiber.  The Ultra Fiber Disc maintains the superior half-engagement feeling specific to the Organic material.  With improved high heat resistance, it provides the functionality essential for street performance and mild racing applications.


• Clutch Cover
  • These clutch covers are designed to achieve a clamping load that is approximately 40% higher than the genuine part allowing higher torque transmitting capacity.  Ductile material is used for all pressure plates and high burst strength can be achieved in all temperature ranges.

This kit is a direct OE replacement Performance Clutch Kit and will not require any modifications during installation. It is a complete clutch kit and includes all necessary components when replacing your clutch.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 10-3/8" x 10T x 1-1/8" Dampened Push
Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Clamp Load = 2473 lbs. Engine Torque = 314 lbs-ft.

Refer to the technical bulletin TB013 regarding installation instructions to avoid engine sensor damage.

Refer to the technical bulletin TB020 regarding the potential for premature clutch wear due to insufficient clearance between the slave cylinder and the bell-housing.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: