Technical Bulletin | Converting to a Solid Flywheel

Shop By Category


Phoenix Friction Technical Bulletin	TB043
Problem: Converting to a Solid Flywheel Parts Affected: 07-131, FW127, FW128

These flywheels are made to work with 07-131. It cannot be used with the OE clutch and disc. The factory backing plate must be reused. When installing these flywheels, use only the bolts supplied with the new flywheel. Make sure there is thread sealant on the bolts and tighten the bolts in a star pattern. Torque the crankshaft bolts to 45-49 ft.lbs.