107237-22 New Spicer Style 14 in. (350mm) Cast Iron Pull-Type Angle Spring 2 Plate 900 lbs.ft. Clutch Set: 1-3/4" Spline 3 Ceramic Super Button

This is a new 14" Cast Iron Pull Type Clutch Set that replaces an Eaton Fuller Stamped Cover clutch set.  Use of a Cast Iron cover can reduce cover flex and provide quicker release. The clutch discs have 8 springs and 3 Cerametallic Super Buttons per side.

Note: If you have a hydraulic release system, you may have to use a Solo style clutch kit so that the clutch maintains the proper adjustment throughout it's life.  Consult the Truck Manufacturer's manual.

This kit also replaces the discontinued 13" pull-type clutch kit GM 15637235 or Lipe kit LP2070546..

Due to the properties of cast iron and the casting design of this unit, this item must be shipped via Common Carrier to a Commercial location with a dock or a lift truck. Additional shipping charges may apply. You can call a sales representative to determine the shipping cost or you will be contacted after receipt of order.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type: Clamp Load:	(3) Standard Ceramic buttons per side 14" x 10T x 1-3/4" Coaxial 8 Spring Pull 2500 lbs.
Kit Includes:  Pressure Plate with attached Release Bearing, (2) Clutch Discs, Center Plate with Ring
Engine Torque = 900 lb-ft.

This product does not have any applicable Technical Bulletins at this time.

There are no comments for this product.

Fits: