02-040CK.3C Solid Flywheel Stage 3 Ceramic Clutch Conversion Kit: Volkswagen Golf Jetta 2.8L 2002 - 2005 - 9-1/2 in.

This is a Phoenix Friction Stage 3 Solid Flywheel Conversion Clutch Kit. This kit includes all parts needed to convert the Dual Mass Flywheel to a Solid Flywheel. The kit features a high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.

A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

02-040             Organic, Engine Torque Capacity = 210 lb.ft., 220HP (Used with Dual Mass Flywheel)
02-040CK         Organic, Engine Torque Capacity = 210 lb.ft., 220HP (includes flywheel)
02-040CK.2K    Kevlar, Engine Torque Capacity = 250 lb.ft., 265HP (includes flywheel)

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic 9-1/2" x 23T x 15/16" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Concentric Slave Cylinder & Release Bearing Assembly, Flywheel, Mounting Bolts
Engine Torque = 290 lb-ft., 305HP

This product does not have any applicable Technical Bulletins at this time.

There are no comments for this product.

Fits: