07-042.5K Stage 5 Ultimate Kevlar Clutch Kit: Ford Mustang, Mercury Capri - 10-1/2 in.

This is a Phoenix Friction Stage 5 Kevlar Street Performance Clutch Kit. The kit features an Heavy Duty Clamp Pressure Plate and a high heat Kevlar spring dampened disc. This Phoenix Friction Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 80% increase in engine torque capacity over the OE clutch. At the same time, you will only notice a slight increase in pedal effort over the stock clutch. In addition, no modifications to the original clutch release system are necessary. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break-in period to properly seat for optimum performance.

A Phoenix Stage 5 Kevlar product is a direct factory fit and requires no modifications for installation. An upgraded clutch release cable with a billet aluminum quadrant is recommended. Use CRC108AQF for 1982-1995 5.0L models and CRC302AQF for 1996-2001 4.6L models. 

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

07-042              Organic, Engine Torque Capacity = 265 lb.ft., 295HP
07-042.2           Organic, Engine Torque Capacity = 360 lb.ft., 400HP
07-042.2DF       Dual Friction, Engine Torque Capacity = 340 lb.ft., 375HP
07-042.2K         Kevlar, Engine Torque Capacity = 325 lb.ft., 360HP
07-042.3C        Ceramic, Engine Torque Capacity = 390 lb.ft., 435HP
07-042.4           Organic, Engine Torque Capacity = 480 lb.ft., 530HP
07-042.4K         Kevlar, Engine Torque Capacity = 440 lb.ft., 490HP
07-042.5C        Ceramic, Engine Torque Capacity = 530 lb.ft., 585HP
07-042.6C        Ceramic, Engine Torque Capacity = 705 lb.ft., 780HP

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Kevlar 10-1/2" x 10T x 1-1/16" Dampened Push
Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 585 lb-ft., 650HP

Refer to the technical bulletin TB018 regarding possible "Growling Noise" when clutch pedal is depressed.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: