08-022.2DF Stage 2 Dual Friction Clutch Kit: Honda Civic, Civic Del Sol, Civic Hybrid - 8-3/8 in.

This is a Phoenix Friction Stage 2 Dual Friction Street Performance Clutch Kit. It will provide up to a 30% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. The clutch disc has a bonded ceramic button facing on the flywheel side and a high quality woven organic facing on the pressure plate side for smooth engagement and increased holding power.

A Phoenix Stage 2 Dual Friction Street Performance product is a direct factory fit and requires no modifications for installation. It is a complete clutch kit and includes all necessary components when replacing your clutch.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

08-022           Organic, Engine Torque Capacity = 135 lb.ft., 170HP
08-022.2         Organic, Engine Torque Capacity = 155 lb.ft., 195HP
08-022.2K       Kevlar, Engine Torque Capacity = 155 lb.ft., 195HP
08-022.3C      Ceramic, Engine Torque Capacity = 185 lb.ft., 235HP
08-022.4C      Ceramic, Engine Torque Capacity = 215 lb.ft., 270HP

08-022iF         Organic, Engine Torque Capacity = 135 lb.ft., 170HP (includes flywheel)
08-022iF.3C    Ceramic, Engine Torque Capacity = 185 lb.ft., 235HP (includes flywheel)

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Dual Friction 8-3/8" x 20T x 7/8" Dampened Push
Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 165 lb-ft., 210HP

This product does not have any applicable Technical Bulletins at this time.

There are no comments for this product.

Fits: