CF9864 Clutch Fork: Dodge Pickup

This is a new OE replacement Clutch Fork. The picture (when available) is of the actual product. Wear at the contact points of the clutch fork and the release bearing can cause hard pedal and/or problems with release. In addition, clutch forks made from stamped steel have a tendency to warp or fatigue and not retain their original shape. It is recommended to carefully inspect the clutch fork for these issues and replace as required. Inspection of the transmission bearing retainer, clutch ball stud, bushings, and other release system components is also highly recommended at this time. Replace parts as necessary.

Overall Length: 13-3/8"
Rod to Pivot: 12-1/4"
Pivot to Bearing: 6-3/4"
Ratio: 1.81

Fork Opening: 2"
Bearing Contact Point - Center to Center: 3-3/4"

Refer to the technical bulletin TB044 regarding the proper clutch fork orientation during replacement.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: