CRC501's BACK IN STOCK for Topkicks 2003-2009! Get yours while they're still available.
29thAnniversarySeal

Start Here

Using the vehicle selector to the right will present you with the correct selection of parts relevant to your specific vehicle.

DMF023 Dual Mass Flywheel: Audi A4, A6, VW Passat 2.8L

Actual product(s) shown.

DMF023 Dual Mass Flywheel: Audi A4, A6, VW Passat 2.8L

MSRP: $1000.89559.3900
Price: $588.79
Sale Price: $559.39

This item qualifies for Free Shipping!


Part #: DMF023
Brand: Phoenix Friction Products
Weight: 29
Handling Time: 1-2 days
This is NEW OE Dual Mass Flywheel. All Dual Mass Flywheels are manufactured by OE manufacturers. The picture (when available) is of the actual product, and shows both sides. If the flywheel you are replacing is different in any way, please contact us for technical assistance.

A dual mass flywheel (DMF) absorbs vibrations from the engine through the transmission input shaft and on through the rest of the drivetrain. The DMF minimizes Gear Roll-over noise generated in manual transmissions that are mostly filled with automatic transmission fluid these days. The reason it is called a dual mass flywheel is that there are two plates joined by a bearing and dampner spring assembly that often includes a friction pack as well. The first plate mounts to the crankshaft and has the starter ring gear on it. The second plate is where the pressure plate bolts to.

This type of flywheel is not recommended with performance clutches due to it's designed torque limitation. In addition, when used in towing applications, the weight of the towed load can adversely affect the life expectancy of this type of flywheel. As such we do not warrant this flywheel when used in either heavy towing or performance applications..

These flywheels cannot be resurfaced because the resulting grinding grit will damage the internal components.

This is a direct factory replacement part and no modifications are necessary to make it fit.

Flywheel Weight (lbs)

28.7

Weighted for Externally Balanced Engine No

Solid or Dual Mass

Dual Mass

Material

Cast Iron

Flywheel Step

0.000"

Pressure Plate Bolt Circle

10.425"

Pressure Plate Bolt Hole Thread Size

M8 x 1.25

Dowel Pin Location

Dowel Pin Centered

Dowel Pin Size 0.235"

Flat or Stepped

Flat

Pressure Plate Bolt Pattern

6 evenly spaced

Crankshaft Center Hole Diameter

N.A.

Crankshaft Mating Surface to Pressure Plate Mounting Surface

1.494"

Crankshaft Bolt Circle Diameter

2.68"

Number of Crankshaft Bolt Holes

8

Crankshaft Bolt Hole Size

0.423"

Flywheel Counter Bore Diameter

5.97"

Flywheel Counter Bore Depth

0.107"

Ring Gear Outside Diameter

11.275"

Ring Gear Inside Diameter

N.A.

Number Of Teeth

135

Friction Surface to Top of Gear

N.A.

Gear Height

N.A.

Top of Gear to Table

N.A.

   
Customer Reviews
(0.00)
# of Ratings: 0
There are no comments for this product.
Fits:
Shipping Estimate: