SCB2-2.00 Clutch Brake: 2 Piece - 2 in. Kwik-Konnect

This Clutch Brake is an Eaton Kwik-Konnect two piece style brake.  The brake uses two roll allen screws to hold the clutch brake in place once it is installed.  If the clutch brake should fail, it can be removed in place without pulling the transmission.  The allen screws can be back out with an allen wrench through the inspection cover opening in the bellhousing.  Once the are out, the brake splits into two pieces that can be removed from the transmission input shaft.

This product does not have any applicable Technical Bulletins at this time.

There are no comments for this product.

Fits: