53556401 14 in. (350mm) Stamped Manual Adjust Pull-Type Diaphragm Single Plate 860 lbs.ft. Clutch Set: 1-3/4 in. Spline 6 Ceramic Button

This is a new Valeo 14" Pull Type Clutch Set.  This clutch kit replaces the Eaton Fuller Single or Double Plate clutch set.

It is used on the following applications:
1993 - On   Volvo FE with a Caterpillar 3116 Diesel engine
Peterbilt 200-30 or 200-33 with a Cummins 5.9L Diesel engine

Note: If you have a hydraulic release system, use NMU 53506401. If a manual adjusting clutch is used, the driver cannot tell when the clutch needs adjustment because the clutch pedal will always have free play even though the release yoke is moving towards the clutch cover with the possibility of causing damage to the clutch and related components.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type: Pressure Plate Bolt Hole Circle:	(6) Ceramic Buttons per side 14" x 10T x 1-3/4" 10 Double Springs Pull 15.50"
Kit Includes:  Pressure Plate with attached Release Bearing, Clutch Disc
Engine Torque = 860 lb-ft.

For Removal, Maintenance, Installation, and Adjustment procedures, see the Valeo Truck Clutches Service Manual.

There are no comments for this product.

Fits: