07-503iFA Clutch Kit includes Solid Flywheel: Ford 6.4L Powerstroke Diesel F250 F350 F450 F550 Super Duty - 13 in.

This is a stock replacement clutch kit and Flywheel. The OE flywheel, pressure plate, and woven organic disc are ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.

This is a direct stock replacement clutch kit and will not require any modifications during installation. The original pressure plate bolts are used when replacing these components.  New flywheel mounting bolts are included.

NOTE: The original spacer plate Ford 3C3Z-6A366-AA is no longer required. The solid flywheel is designed to account for that thickness and has the centering lip as an integral part of the piece.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

07-503            Organic, Engine Torque Capacity =575 lb.ft., 365HP (Same as OE)
07-503.3C       Ceramic, Engine Torque Capacity = 775 lb.ft., 500HP

07-503iFA.3C    Ceramic, Engine Torque Capacity = 775 lb.ft., 500HP (includes Flywheel)

This clutch kit includes a new Solid Flywheel.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 13" x 10T x 1-3/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Flywheel, Pilot Bearing, Alignment Tool, Flywheel Mounting Bolts
Engine Torque = 660 lb-ft., 365HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 28 lbs.ft.
Flywheel to Crank Mounting Bolts: 53 lbs.ft.

2005-2008 F250-550 Super Duty manual trans - clutch pedal concern

Some 2005-2008 F250-550 super duty vehicles with a manual transmission may exhibit a clutch pedal concern described as "falls to the floor", "clutch pedal stays on the floor", or "clutch pedal feels spongy". If the concern is diagnosed as the control assembly - clutch hydraulic actuator (base part number 7c522), ensure the heat shield is fully covering the clutch slave cylinder end of the assembly. If the heat shielding is not fully covering the clutch slave cylinder, slide the heat shielding toward the transmission until the forward end of the shield contacts the cylinder mounting flange at the transmission housing.

Source
Item 0966

There are no comments for this product.

Fits: