Start Here

Using the vehicle selector to the right will present you with the correct selection of parts relevant to your specific vehicle.

 

Phoenix Friction Technical Bulletin

TB001


Problem: Critical Clutch Disc to Flywheel Match

Clutch Kits Affected: 07-032, 07-034

  When replacing a clutch, care should be taken to match the disc to the flywheel prior to installation. A mismatched disc and flywheel can cause contact between the disc damper and the inside diameter of the flywheel. The clutch may function properly initially, but release problems will result. A similar problem will occur if the disc is installed backwards. To avoid the problem, ensure the disc damper fits into the flywheel opening with proper clearance.

Kit # 07-032 has a 6-5/8” damper cover plate OD (outer diameter)
Kit # 07-034 has a smaller 5-5/8” damper cover plate OD