04-019.2DF Stage 2 Dual Friction Clutch Kit: Camaro Corvette Firebird Grand Am Grand Prix GTO LeMans Ventura - 10.4 in.

This is a Phoenix Friction Stage 2 Dual Friction Street Performance Clutch Kit. It will provide up to a 30% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. The clutch disc has a bonded ceramic button facing on the flywheel side and a high quality woven organic facing on the pressure plate side for smooth engagement and increased holding power.

A Phoenix Stage 2 Dual Friction Street Performance product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

04-019          Organic, Engine Torque Capacity = 310 lb.ft., 370HP
04-019.1V     Organic, Valeo, Engine Torque Capacity = 310 lb.ft., 370HP
04-019.2       Organic, Engine Torque Capacity = 390 lb.ft., 460HP 
04-019.2DF   Dual Friction, Engine Torque Capacity = 380 lb.ft., 450HP (current selection)
04-019.3C     Ceramic, Engine Torque Capacity = 430 lb.ft., 510HP
04-019.4C     Ceramic, Engine Torque Capacity = 535 lb.ft., 635HP

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Dual Friction - Ceramic/Organic 10-3/8" x 26T x 1-1/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bushing, Alignment Tool
Engine Torque = 380 lb-ft., 450HP

Refer to the technical bulletin TB034 regarding the correct way to attach the release bearing to the clutch fork.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: