04-020.2 Stage 2 Heavy Duty Clutch Kit: Camaro Chevelle Corvette Cutlass 442 Firebird GS455 Monte Carlo - 11 in. x 26 Spline

This is a Phoenix Friction Stage 2 Clutch Kit with an Increased Clamp Load Pressure Plate and an OE woven organic clutch disc. This kit will provide a 20% increase in Engine Torque over the OE clutch kit with only a slight increase in pedal pressure. The OE woven organic disc are ideal for maintaining the smooth engagement you are used to from the original clutch when the vehicle was new and the high clamp load pressure plate offers greater torque capacity when making light modifications to the engine.

This kit is a direct OE replacement Performance Clutch Kit and will not require any modifications during installation. This is a complete clutch kit and includes all necessary components when replacing your clutch.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

04-020             Organic, Engine Torque Capacity = 340 lb.ft., 400HP
04-020.2          Organic, Engine Torque Capacity = 495 lb.ft., 520HP (current selection)
04-020.2DF      Dual Friction, Engine Torque Capacity = 500 lb.ft., 525HP
04-020.3C        Ceramic, Engine Torque Capacity = 525 lb.ft., 550HP
04-020.4C        Ceramic, Engine Torque Capacity = 630 lb.ft., 660HP

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 11" x 26T x 1-1/8" Dampened Push
Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Pilot Bushing, Alignment Tool
Engine Torque = 495 lb-ft., 520HP

Refer to the technical bulletin TB034 regarding the correct way to attach the release bearing to the clutch fork.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: