04-020.4C Stage 4 Ceramic Clutch Kit: Camaro Chevelle Corvette Cutlass 442 Firebird GS455 Monte Carlo - 11 in. x 26 Spline

This is a Phoenix Friction Stage 4 Street Performance Clutch Kit. This kit features a High Clamp Pressure Plate and a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 80% increase over the stock engine torque capacity. At the same time, you will only notice a slight increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride.

Our Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.

A Phoenix Stage 4 Street Performance product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

04-020             Organic, Engine Torque Capacity = 340 lb.ft., 400HP
04-020.2          Organic, Engine Torque Capacity = 495 lb.ft., 520HP
04-020.2DF      Dual Friction, Engine Torque Capacity = 500 lb.ft., 525HP
04-020.3C        Ceramic, Engine Torque Capacity = 525 lb.ft., 550HP
04-020.4C        Ceramic, Engine Torque Capacity = 630 lb.ft., 660HP (current selection)

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic Button 11" x 26T x 1-1/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bushing, Alignment Tool
Engine Torque = 630 lb-ft., 660HP

Refer to the technical bulletin TB034 regarding the correct way to attach the release bearing to the clutch fork.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

Fits: