04-064iF.2DF Stage 2 Dual Friction Clutch Kit including Flywheel: GM Pickups, SUVs, & Van - 12 in.

This is a Phoenix Stage 2 Dual Friction Clutch Kit and OE Flywheel . It will provide up to a 30% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride.

The clutch disc has a bonded ceramic button facing on the flywheel side and a high quality woven organic facing with a steel back on the pressure plate side for smooth engagement and increased holding power.

This is a direct stock replacement clutch kit and will not require any modifications during installation. The original pressure plate and flywheel bolts are used when replacing these components.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

04-064          Organic, Engine Torque Capacity = 365 lb.ft., 280HP
04-064.2       Organic, Engine Torque Capacity = 420 lb.ft., 320HP
04-064.2DF   Dual Friction, Engine Torque Capacity = 440 lb.ft., 335HP
04-064.2K     Kevlar, Engine Torque Capacity = 420 lb.ft., 320HP
04-064F        Organic, Engine Torque Capacity = 365 lb.ft., 280HP
04-064L        Organic, Lever Style, Engine Torque Capacity = 415 lb.ft., 400HP
04-105          Ceramic, Engine Torque Capacity = 505 lb.ft., 385HP
04-105.3       Ceramic, Engine Torque Capacity = 580 lb.ft., 445HP

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Dual Friction - Bonded Ceramic Button on FWS and Woven Fiberglass Facing with a Steel back 11-3/4" x 10T x 1-1/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Flywheel, Pilot Bushing, Alignment Tool
Engine Torque = 440 lb-ft., 335HP

Refer to the technical bulletin TB005 regarding the use of over-sized lock washers causing premature disc failures.

Refer to the technical bulletin TB032 regarding possible Hard Pedal or Noise as a result of a failed pedal return spring.

Refer to the technical bulletin TB034 regarding the correct way to attach the release bearing to the clutch fork.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

Fits: