07-154CK.3C Stage 3 Ceramic Solid Flywheel Conversion Clutch Kit: Ford 7.3L Powerstroke Diesel F250 F350 F450 Pickup - 13 in.

This is a Phoenix Friction Stage 3 Solid Flywheel Conversion Clutch Kit. This kit includes all parts needed to convert the Dual Mass Flywheel to a Solid Flywheel. The kit features a high heat Ceramic spring dampened disc. It will provide up to a 45% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications. A GREAT value performance clutch kit that enables quick vehicle launch.

This is a direct stock replacement clutch kit and will not require any modifications during installation.  The appropriate new mounting bolts are also included.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

LuK Type:
07-154CK           Organic, Engine Torque Capacity = 510 lb.ft., 265HP (includes flywheel)
07-154CK.2        Organic, Engine Torque Capacity = 610 lb.ft., 315HP (includes flywheel)
07-154CK.3        Organic, Engine Torque Capacity = 685 lb.ft., 355HP (includes flywheel)
07-154CK.4        Organic, Engine Torque Capacity = 785 lb.ft., 405HP (includes flywheel)
07-154CK.4C      Ceramic, Engine Torque Capacity = 850 lb.ft., 440HP (includes flywheel)
07-154CK.5C      Ceramic, Engine Torque Capacity = 965 lb.ft., 500HP (includes flywheel)
07-154CK.6C      Ceramic, Engine Torque Capacity = 1110 lb.ft., 575HP (includes flywheel)

Valeo Type:
07-501CK       Organic, Engine Torque Capacity = 530 lb.ft., 275HP
07-501CK.3C  Ceramic, Engine Torque Capacity = 750 lb.ft., 400HP

To determine the horsepower added by performance modifications, click here

To see comments and suggestions regarding transmission gear rattle, click here

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 13" x 10T x 1-1/4" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Flywheel, Pilot Bearing, Alignment Tool, Pressure Plate Mounting Bolts, Flywheel Mounting Bolts
Engine Torque = 750 lb-ft., 400HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 21 lb.ft.
Flywheel to Crank Mounting Bolts: 89 lb.ft.

Refer to the technical bulletin TB031 regarding possible "No Release" issue and the use of Upgraded Hydraulics.
Covers 1993-1995 7.3L DIESEL and 7.5L GAS Ford F250, F350, and F450 Super Duty

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: