15-020.2KC Stage 2 Dual Friction Clutch Kit: Subaru Baja, Forester, Impreza, Impreza Outback, Legacy, Legacy Outback, Outback - 8-7/8 in.

This is a Phoenix Friction Stage 2 combination Kevlar and Ceramic Street Performance Clutch Kit. The kit features an original stock pressure plate and a Phoenix Friction high heat Kevlar and Ceramic spring dampened disc.

The combination of a full-faced Kevlar friction material and a bonded Ceramic button ring clutch handles high heat levels and minimizes chatter. It will provide up to a 33% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. The combination of these two premium friction materials provides up to a 200% gain in clutch life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.

A Phoenix Stage 2 combination Kevlar and Ceramic Street Performance Clutch Kit is a direct factory fit and requires no modifications for installation. The kit is a complete clutch kit and includes all necessary components when replacing your clutch.

ge 2 Dual Friction product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

15-020             Organic, Engine Torque Capacity = 170 lb.ft., 200HP
15-020.2K        Kevlar, Engine Torque Capacity = 200 lb.ft., 250HP
15-020.3C        Ceramic, Engine Torque Capacity = 240 lb.ft., 275HP
15-020.5C        Ceramic, Engine Torque Capacity = 350 lb.ft., 400HP
15-020.5K        Kevlar, Engine Torque Capacity = 300 lb.ft., 350HP
15-801.2          Organic, Engine Torque Capacity = 250 lb.ft., 300HP

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Dual Friction - Ceramic/Kevlar 8-7/8" x 24T x 31/32" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 200 lb-ft., 250HP

This product does not have any applicable Technical Bulletins at this time.

There are no comments for this product.

Fits: