Largest selection of clutches on the web. Free Shipping on car parts under 50 lbs.

Start Here

Using the vehicle selector to the right will present you with the correct selection of parts relevant to your specific vehicle.

17-012.2K Stage 2 Kevlar Clutch Kit: VW Cabriolet, Golf, Jetta, Rabbit, Scirocco - 8-1/4 in.

Actual product(s) shown.

17-012.2K Stage 2 Kevlar Clutch Kit: VW Cabriolet, Golf, Jetta, Rabbit, Scirocco - 8-1/4 in.

In Stock
MSRP: $661.29369.5900
Price: $388.99
Sale Price: $369.59

This item qualifies for Free Shipping!

Part #: 17-012.2K
Brand: Phoenix Friction Products
Weight: 15
Handling Time: 1-3 days
This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an original stock pressure plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.

Other available clutch kits for this vehicle:

17-012                    Organic, Engine Torque Capacity = 130 lb.ft., 140HP
17-012.3C               Ceramic, Engine Torque Capacity = 175 lb.ft., 185HP

Clutch Specifications:
Friction Material:
Disc Size:
Disc Type:
Release Type:
8-1/4" x 24T x 13/16"
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Alignment Tool
Engine Torque = 145 lb-ft., 155HP
Refer to the technical bulletin TB007 regarding the location and replacement of the clutch release bearing.

Refer to the technical bulletin TB010 regarding the proper orientation of the clutch cover with the flywheel dowel pins.

Refer to the technical bulletin TB035 regarding diagnosing slip and chatter conditions.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

Customer Reviews
# of Ratings: 0
There are no comments for this product.
Shipping Estimate: