Largest selection of clutches on the web. Free Shipping on car parts under 50 lbs.
29thAnniversarySeal

Start Here

Using the vehicle selector to the right will present you with the correct selection of parts relevant to your specific vehicle.

FW613 Flywheel: Chevrolet GMC C1500 C2500 C3500 7.4L
View Larger Image

Actual product(s) shown.

FW613 Flywheel: Chevrolet GMC C1500 C2500 C3500 7.4L

This flywheel is used with a Standard (Manual) Transmission only.
PreviousUpNext
In Stock
MSRP: $319.79178.6900
Price: $188.09
Sale Price: $178.69

This item qualifies for Free Shipping!


Part #: FW613
Brand: Phoenix Friction Products
Weight: 30
Handling Time: 1-2 days
This is NEW OE replacement Flywheel. The picture is of the actual product, and shows both sides. If the flywheel you are replacing is different in any way, please contact us for technical assistance. Flywheels that have too much material removed can affect the clutch release in hydraulic release systems. Is some cases, the flywheel cannot be resurfaced. In these cases, the flywheel is sold as part of the clutch kit.

Special Note:
This flywheel is made for the narrow facing disc design used from 1997 to 2000. The flywheel casting number for this flywheel is 12556919N. When using this flywheel to replace the wide facing disc design used in the 1996 model year application, the clutch kit also needs to be updated to the 04-154 series of clutches. This is offered as an alternative due to the 1996 flywheel being discontinued. The wide facing flywheel casting number is 12550193N.

Flywheel Weight (lbs)

 30.0
Weighted for Externally Balanced Engine No

Solid or Dual Mass

 Solid

Material

 Cast Iron

Flywheel Step

 0.000"

Pressure Plate Bolt Circle

 12.625"

Pressure Plate Bolt Hole Thread Size

 3/8" x 16 UNC

Dowel Pin Location

 No Dowel Pin
Dowel Pin Size N.A.

Flat or Stepped

 Flat

Pressure Plate Bolt Pattern

 6 Holes equally spaced

Crankshaft Center Hole Diameter

 2.477"

Crankshaft Mating Surface to Pressure Plate Mounting Surface

 0.800"

Crankshaft Bolt Circle Diameter

 3.586"

Number of Crankshaft Bolt Holes

 6 plus 1

Crankshaft Bolt Hole Size

 0.47"

Flywheel Counter Bore Diameter

 8.323"

Flywheel Counter Bore Depth

 0.250"

Ring Gear Outside Diameter

 14.167"

Ring Gear Inside Diameter

 N.A.

Number Of Teeth

 168
Special Note:

This flywheel is made for the narrow facing disc design used from 1997 to 2000. The flywheel casting number for this flywheel is 12556919N. When using this flywheel to replace the wide facing disc design used in the 1996 model year application, the clutch kit also needs to be updated to the 04-154 series of clutches. This is offered as an alternative due to the 1996 flywheel being discontinued. The wide facing flywheel casting number is 12550193N.
Customer Reviews
(3.00)
# of Ratings: 2
(Only registered customers can rate)
1. Anonymous User on 12/23/2023, said:
Worst customer treatment ever. Was retaliated against by Joe holding/delaying parts for over a month and lying about them being in stock. Then no valid apology from Sally? Will try to write a review on line so no one else goes though this.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
Showing comments 1-1 of 1
Fits:
Customers Who Bought This Product Also Bought
04-154 Clutch Kit for Solid Flywheel: GM 6.5L Diesel 7.4L Gas Pickups - 12 in.
04-154 Clutch Kit for Solid Flywheel: GM 6.5L Diesel 7.4L Gas Pickups - 12 in.
In Stock
Shipping Estimate: