04-154 Clutch Kit for Solid Flywheel: GM 6.5L Diesel 7.4L Gas Pickups - 12 in.

This is a stock replacement clutch kit containing only quality tested components. The original stock pressure plate and woven organic disc are ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.

This is a direct stock replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch. This clutch works with the later narrow facing style flywheel FW613 (7.4L Gas) or FW126 (6.5L Diesel). The 1996 early style wide facing replacement clutch only works with the original wide faced flywheel which is no longer available.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle: 

04-154HD         Organic, Engine Torque Capacity = 485 lb.ft., 315HP
04-154.3C        Ceramic, Engine Torque Capacity = 675 lb.ft., 450HP
04-154iF           Organic, Engine Torque Capacity = 485 lb.ft., 315HP (includes Flywheel)
04-154iF.3C      Ceramic, Engine Torque Capacity = 675 lb.ft., 450HP (includes Flywheel)

Used with a conventional solid flywheel

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 12" x 10T x 1-1/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 485 lb-ft., 315HP

Refer to the technical bulletin TB037 regarding converting to a Solid Flywheel.

Refer to the technical bulletin TB040 regarding Concentric Salve Cylinder Release Bearing installation procedures.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

Fits: