04-307.3C Stage 3 Performance Ceramic Clutch Kit: Chevy Cobalt SS - 9-1/2 in.

HOT SELLING PRODUCT - Order soon!

This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic button spring dampened disc with a forged heat treated hub and chrome silica disc springs. The clutch kit will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride.

Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% greater life expectancy over original equipment woven organic linings under normal driving conditions. These buttons will absorb the most energy of all the friction materials and it is the material of choice for the highest torque applications.

A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

04-307         Organic, Engine Torque Capacity = 260 lb.ft., 275HP
04-307.2K     Kevlar, Engine Torque Capacity = 290 lb.ft., 310HP


See a customer's car with 75 shot Nitrous Pack in action!

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic Buttons 9-1/8" x 14T x 15/16" Dampened Self-Adjusting Push
Kit Includes: Pressure Plate, Clutch Disc, Concentric Slave Cylinder & Release Bearing Assembly, Alignment Tool
Engine Torque = 330 lb-ft., 355HP

This product does not have any applicable Technical Bulletins at this time.

There are no comments for this product.

Fits: