08950B Exedy Stage 2 Ceramic 3 Paddle Racing Clutch Kit: Acura Integra, Honda Civic, Del Sol - 220mm

This is an Exedy Stage 2 clutch Kit with a high clamp load pressure plate and a ceramic button clutch disc. This kit will provide up to a 80% increase in Engine Torque over the OE clutch kit with only a slight increase in pedal pressure.

Features:

• Cerametallic Friction Disc
  • Exedy cerametallic clutches are designed to handle the abuse of high power modified engines.  These cerametallic friction materials can handle much more abuse than stock type disc assemblies without slipping and fading.

• Clutch Cover
  • These clutch covers are designed to achieve a clamping load that is approximately 40% higher than the genuine part allowing higher torque transmitting capacity.  Ductile material is used for all pressure plates and high burst strength can be achieved in all temperature ranges.

This Exedy Stage 2 clutch kit is a direct OE replacement Performance Clutch Kit and will not require any modifications during installation. This is a complete clutch kit and includes all necessary components when replacing your clutch.


Other available clutch kits for this vehicle:

08-026            Organic, Engine Torque Capacity = 140 lb.ft., 150HP
08-026.2         Organic, Engine Torque Capacity = 220 lb.ft., 240HP
08-026.2K       Kevlar, Engine Torque Capacity = 160 lb.ft., 170HP
08-026.3C       Ceramic, Engine Torque Capacity = 185 lb.ft., 200HP
08-026.3K       Kevlar, Engine Torque Capacity = 250 lb.ft., 275HP
08-026.4C       Ceramic, Engine Torque Capacity = 300 lb.ft., 325HP

08-026iF          Organic, Engine Torque Capacity = 220 lb.ft., 240HP (includes flywheel)
08-026iF.3C     Ceramic, Engine Torque Capacity = 185 lb.ft., 200HP (includes flywheel)

08-800B.2       Organic, Engine Torque Capacity = 250 lb.ft., 290HP

Exedy Part Number: 08950B

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic 8-5/8" x 24T x 1-1/32" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 285 lb-ft., 360HP

This product does not have any applicable Technical Bulletins at this time.

There are no comments for this product.

Fits: