08-026.3K Stage 3 Kevlar Clutch Kit: Acura Integra, Honda Civic Del Sol, Civic Si, CR-V - 8-5/8 in.

This is a Phoenix Friction Stage 3 Kevlar Street Performance Clutch Kit. The kit features a Heavy Duty Pressure Plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will hardly notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.

A Phoenix Stage 3 Kevlar product is a direct factory fit and requires no modifications for installation. It is a complete clutch kit and includes all necessary components when replacing your clutch.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

08-026            Organic, Engine Torque Capacity = 140 lb.ft., 150HP
08-026.2         Organic, Engine Torque Capacity = 220 lb.ft., 240HP
08-026.2K       Kevlar, Engine Torque Capacity = 160 lb.ft., 170HP
08-026.3C       Ceramic, Engine Torque Capacity = 185 lb.ft., 200HP
08-026.4C       Ceramic, Engine Torque Capacity = 300 lb.ft., 325HP

08-026iF          Organic, Engine Torque Capacity = 220 lb.ft., 240HP (includes flywheel)
08-026iF.3C     Ceramic, Engine Torque Capacity = 185 lb.ft., 200HP (includes flywheel)

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Kevlar 8-5/8" x 24T x 1-1/32" Dampened Push
Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 250 lb-ft., 275HP

This product does not have any applicable Technical Bulletins at this time.

There are no comments for this product.

Fits: