05-227.2K Stage 2 Kevlar Clutch Kit: Mitsubishi Lancer EVO 4B11 Turbo motor - 9-1/2 in.

This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch Kit. The kit features an original stock pressure plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.

A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation. It is a complete clutch kit and includes all necessary components when replacing your clutch.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Equivalent to:

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Kevlar Button 9-1/2" x 23T x 1" Dampened Push
Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Alignment Tool
Engine Torque = 330 lb-ft., 410HP

See Mitsubishi Technical Bulletin SR-13-009REV, dated 12/13, regarding faulty Clutch Master Cylinder.

Also see Mitsubishi Technical Bulletin TSB-14-21-001, dated 5/14, regarding upgrading the clutch pedal and clutch master cylinder to the updated design.

Failure to address these issues will void your warranty.

 

There are no comments for this product.

Fits: