FW616 Flywheel: Ford Mustang V6 4.0L T5OD 5 Speed

Actual product(s) shown.

This flywheel is used with a Standard (Manual) Transmission only.

If replacing a three piece flywheel, Ford bushing F5TZ-6K389-AA will also be required.

Check Availability with Sales

MSRP: $NaN0.0000

Price: $0.00

This item qualifies for Free Shipping!

Part #:	FW616
Brand:	Phoenix Friction Products
Weight:	25
Handling Time:	1-2 days

Description
Specs
Tech Bulletins
Ratings
Fits These Vehicles
Customers Also Bought
Shipping Estimator

This is NEW OE replacement Flywheel. The picture (when available) is of the actual product, and shows both sides. If the flywheel you are replacing is different in any way, please contact us for technical assistance.

Flywheels that have too much material removed can affect the clutch release in hydraulic release systems. Is some cases, the flywheel cannot be resurfaced. In these cases, the flywheel is sold as part of the clutch kit.

Flywheel Weight (lbs)	25.7
Weighted for Externally Balanced Engine	No
Solid or Dual Mass	Solid
Material	Cast Iron
Flywheel Step	-0.412"
Pressure Plate Bolt Circle	10.625”
Pressure Plate Bolt Hole Thread Size	M8” x 1.25
Dowel Pin Location	Next to bolt hole
Dowel Pin Size	0.247"
Flat, Pot, or Stepped Flywheel	Pot
Pressure Plate Bolt Pattern	6 Holes equally spaced
Crankshaft Center Hole Diameter	1.124”
Crankshaft Mating Surface to Pressure Plate Mounting Surface	1.997”
Crankshaft Bolt Circle Diameter	1.752”
Number of Crankshaft Bolt Holes	8
Crankshaft Bolt Hole Size	0.404”
Flywheel Counter Bore Diameter	7.285”
Flywheel Counter Bore Depth	0.290”
Ring Gear Outside Diameter	11.66”
Ring Gear Inside Diameter	10.50"
Number Of Teeth	138

Important note:

If replacing a three piece flywheel, Ford bushing F5TZ-6K389-AA will be required.

Customer Reviews

(2.00)

# of Ratings: 1

(Only registered customers can rate)

1. Anonymous User on 12/18/2022, said:

Seems nice, weight is good. Unfortunately it did not fit properly. Pushed the center of the too far forward. front gears barely engaged, rears at 50%. Had to remove it and go with another. Too bad I really like it and was looking forward to running it.

Was this comment helpful? yes no

(1 people found this comment helpful, 0 did not)

Showing comments 1-1 of 1

Fits:

Customers Who Bought This Product Also Bought