Use CHAT for product questions and assistance 

Start Here

Using the vehicle selector to the right will present you with the correct selection of parts relevant to your specific vehicle.

04-154iF.3C Stage 3 Ceramic Clutch Kit including Solid Flywheel: GM 6.5L Diesel Pickups, SUVs, and Vans - 12 in.

Actual product(s) shown.

04-154iF.3C Stage 3 Ceramic Clutch Kit including Solid Flywheel: GM 6.5L Diesel Pickups, SUVs, and Vans - 12 in.

In Stock
MSRP: $1037.19579.5900
Price: $610.09
Sale Price: $579.59

This item qualifies for Free Shipping!

Part #: 04-154iF.3C
Brand: Phoenix Friction Products
Weight: 71
Handling Time: 1-3 days
This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction manufactured high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride.

Our Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.

A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.

  1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
  2. Our kits contain all new components
  3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
  4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
  5. We warrant that all products are free from defects in workmanship and materials
  6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

04-154             Organic, Engine Torque Capacity = 485 lb.ft., 315HP
04-154iF           Organic, Engine Torque Capacity = 485 lb.ft., 315HP (includes Flywheel)
04-154iF.3C      Ceramic, Engine Torque Capacity = 675 lb.ft., 450HP (includes Flywheel)
Clutch Specifications:
Friction Material:
Disc Size:
Disc Type:
Release Type:
12" x 10T x 1-1/8"
Coaxial Dampened
Kit Includes:  Pressure Plate, Pressure Plate Mounting Bolts, Clutch Disc, Release Bearing, Flywheel, Flywheel Mounting Bolts, Pilot Bushing, Alignment Tool
Engine Torque = 675 lb-ft., 450HP

Flywheel bolt torque specification: 63-67 lbs.ft.

The Flywheel Crank bore diameter needs to be greater than 7.125" in order to accommodate the clutch disc spring cage shipped with this kit.
Technical Bulletin information Refer to the technical bulletin TB037 regarding converting to a Solid Flywheel.

Refer to the technical bulletin TB040 regarding Concentric Salve Cylinder Release Bearing installation procedures.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

Customer Reviews
# of Ratings: 0
There are no comments for this product.
Shipping Estimate: