07-131.3C Stage 3 Ceramic Clutch Kit: Ford 7.3L Diesel F250 F350 F450 Pickup - 12-1/4 in.

This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications. A GREAT value performance clutch kit that enables quick vehicle launch.

A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

07-131                  Organic, Engine Torque Capacity = 380 lb.ft., 195HP
07-131.2K             Kevlar, Engine Torque Capacity = 440 lb.ft., 230HP

07-131ACK           Organic, Engine Torque Capacity = 380 lb.ft., 195HP (includes flywheel FW128)
07-131ACK.3C      Ceramic, Engine Torque Capacity = 555 lb.ft., 285HP (includes flywheel FW128)

07-131CK            Organic, Engine Torque Capacity = 380 lb.ft., 195HP (includes flywheel FW127)
07-131CK.2K       Kevlar, Engine Torque Capacity = 440 lb.ft., 230HP (includes flywheel FW127)
07-131CK.3C       Ceramic, Engine Torque Capacity = 555 lb.ft., 285HP (includes flywheel FW127)

To determine the horsepower added by performance modifications, click here

To see comments and suggestions regarding transmission gear rattle, click here

This kit is used with a Solid Flywheel only.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic Button 12-1/4" x 10T x 1-1/4" Dampened Push
Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 555 lb-ft., 285HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 20-29 lb.ft.
Flywheel to Crank Mounting Bolts: 47 lb.ft.

Refer to the technical bulletin TB031 regarding possible "No Release" issue and the use of Upgraded Hydraulics.
Covers 1993-1995 7.3L DIESEL and 7.5L GAS Ford F250, F350, and F450 Super Duty

Refer to the technical bulletin TB043 regarding solid flywheel installation notes.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: